A/Model/AE70/71/85/86/Installing An Electronic Distributor

From Rollaclub

Revision as of 04:47, 11 September 2007 by Too quick (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Want to run a FWD 4AC electronic dizzy on your RWD 4AC ?

Run electronic ignition coils on full 12 volt eg bypass ballast resistor.

Pin 3 & Pin 7 both go to the dizzy - electronic type ( 3 goes to negative side 7 to positive side ) Pin 15 - Positive side of Coil Pin 16 - Negative side of Coil Unmarked Pin was earth.

Thread link http://www.rollaclub.com/board/index.php?showtopic=15085&pid=197131&st=0&#entry197131

Information courtesy of KE30 KE35 KE55.

Retrieved from "https://www.rollaclub.com/wiki/index.php?title=A/Model/AE70/71/85/86/Installing_An_Electronic_Distributor&oldid=2892"