Tech:Engine/K Series/Torque Settings: Difference between revisions
Jump to navigation
Jump to search
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
2nd stage 50Nm or 37Ft-Lb. | 2nd stage 50Nm or 37Ft-Lb. | ||
3rd stage 65Nm or 48 Ft-Lb | 3rd stage 65Nm or 48 Ft-Lb | ||
Torqueing sequence: | Torqueing sequence: | ||
<-- Front 8 6 1 3 9 | <-- Front 8 6 1 3 9 | ||
10 4 2 5 7 | |||
(submitted by SLO-030) | (submitted by SLO-030) | ||
Latest revision as of 08:06, 15 May 2009
Head Gasket Torque Specs
Specs are for an ACL Ezy Fit head gasket PN BD950EZ. Specs were also the same for ACL Mono Torque head gasket PN BD950MT
1st stage 25Nm or 18.5Ft-Lb. 2nd stage 50Nm or 37Ft-Lb. 3rd stage 65Nm or 48 Ft-Lb
Torqueing sequence: <-- Front 8 6 1 3 9
10 4 2 5 7
(submitted by SLO-030)
3K Engine Torque Specs
Main bearing bolts: 48 lb/ft
Conrod nuts: 38 lb/ft
Cam sproket bolt: 22 lb/ft
Fly wheel bolts: 48 lb/ft
Clutch bolts: 9 lb/ft
Head bolts: per gasket recommendation.
They're the only ones I'd really worry about. All the rest are just "tight".
(Submitted by Redwarf)
Discussion Thread Reference http://www.rollaclub.com/board/index.php?showtopic=6581
4K Engine Torque Specs
5K Engine Torque Specs
Article by Redwarf / Grimwolge
Back to K Series
Back to Main Page