foc64 Posted September 14, 2006 Report Posted September 14, 2006 I found this link while looking for a 4age 16V ignitor part number, may be helpful to some: http://www.celicatech.com/Colossus20v/20valveparts.html If any one can help with a Toyota part number for a 4age 16v ignitor I'd appreciate it. Chris Quote
NickZ Posted September 14, 2006 Report Posted September 14, 2006 Ive been wanting to ask this question, Is the 4age 20V water pump the same as a 16 valve one? Quote
beerhead Posted September 15, 2006 Report Posted September 15, 2006 (edited) Th 20V water pump has an extra fin on it. You'll find the pump won't fit over a RWD 4AC housing the fins are a little bigger. I've heard the 16V will bolt up no troubles, and I've got one for the job, so i can let you know definitely in a few days. I've got a source for non genuine silvertop timing belts for $30 if anyone needs one. I'll get that part number for the ignitor for you too, if it's a bigport. Edited September 15, 2006 by beerhead Quote
NickZ Posted September 15, 2006 Report Posted September 15, 2006 (edited) My problem is i think my 20v water pump is about to die, it leaks coolent while its cold but once running for 2 min it ok, I have no idea where i would buy a 20v one, so i am hoping a 16v one will be the same asi can get them cheap Edited September 15, 2006 by NickZ Quote
Toyrolla Posted September 18, 2006 Report Posted September 18, 2006 My problem is i think my 20v water pump is about to die, it leaks coolent while its cold but once running for 2 min it ok, I have no idea where i would buy a 20v one, so i am hoping a 16v one will be the same asi can get them cheap Look for a guy on twincam.org called Mr Revhead. He's in NZ but gives great prices on genuine TRD and Toyota parts. Waterpump for 20V is a good example. He quoted me $80 NZD whereas in Aust I got quoted $167 from Toyota. Toyota eventually came down to about $130 because I told them how cheap I could get it (included $50 freight from NZ) The O-ring that goes between the pump and the block never looks like it is the right size. I stuck mine one with some gasket goo to make it go in. Seems to have worked. Quote
Raven Posted September 18, 2006 Report Posted September 18, 2006 Mr Revhead I believe also uses these forums ;) Quote
Mr Revhead[RL] Posted September 18, 2006 Report Posted September 18, 2006 who me? nah I'm not here. ;) [email protected] Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.