4k Tension Settings

[boosted_gem]

Just wondering if anyone had any info on what tension all the main bolts in the motor should be set to such as big end and main and others

 

Cheers nathan

 

Thanks in advance

[Robert]

big end - 52 nm

 

main - 66 nm

 

others:

head - 66 nm

[Redwarf]

Or, if you had botherd to search, you would have found it.

 

It's also in the FAQ.

 

http://www.rollaclub.com/faq/index.php?tit...Torque_Settings

Edited August 12, 2006 by Redwarf

[boosted_gem]

I had bothered to check the FAQ but those tension settings were for 3K motors and just wanted to get the figures for the 4K as i wasn't sure if these were the same figure. Before accusing people so not searching read what you yourself have actually searched

 

Nathan

[muller]

www.google.com, works for me

[chrisandliz[RL]]

big end - 52 nm

 

main - 66 nm

 

others:

head - 66 nm

 

NNNNOOOOOO.....

 

thats the lies the hanes spread

 

head it only 40-47 foot pounds or 6.6 kg-m

 

and the main caps 40-47 ft-lb or 6.6 kg-m

 

and the conrods are 29-37 ft-lb or 5.2 kg-m

 

sorry if 66 nm is 6.6 kg-m

 

but i stuffed my car around with the info in a hanes manaul and it cost me money

[coln72]

reading the pack the gaskets come in generally works for me.

[Robert]

NNNNOOOOOO.....

 

thats the lies the hanes spread

 

and the conrods are 29-37 ft-lb or 5.2 kg-m

 

sorry if 66 nm is 6.6 kg-m

 

but i stuffed my car around with the info in a hanes manaul and it cost me money

 

I'm pretty sure that 66nm is 6.6 kg-m

[irokin]

I'm pretty sure that 66nm is 6.6 kg-m

 

6.73 kg m ...close enough