love ke70 Posted July 15, 2006 Report Posted July 15, 2006 https://www4.eaccounts.co.nz/eOrder_v1.asp?sPage2Recnum=1676 ^^ stuff for 3t (remember thats NZ dollars too!) https://www4.eaccounts.co.nz/eOrder_v1.asp?sKitFam=30 ^^ list of toyota engines to pick your part for Quote
towe001 Posted July 16, 2006 Report Posted July 16, 2006 Does it really need new rings ? Does it burn oil ? Low in compression ? Low oil pressure ? My thought would be that since your only planning on using it for a short time would to use new gaskets and give the head a freshen up. This is what i did with my old 3t and drove the car for about other year or so till a front brake caliper seized, the bottom raditor hose blew, the heater core got hole in it and i traded it. Quote
chrisandliz[RL] Posted July 16, 2006 Author Report Posted July 16, 2006 Does it really need new rings ? Does it burn oil ? Low in compression ? Low oil pressure ?My thought would be that since your only planning on using it for a short time would to use new gaskets and give the head a freshen up. This is what i did with my old 3t and drove the car for about other year or so till a front brake caliper seized, the bottom raditor hose blew, the heater core got hole in it and i traded it. does now, coz i broke one , but i just kinda pulled off so it could be broken to start with. well thats what i'm telling meself Quote
coln72 Posted July 16, 2006 Report Posted July 16, 2006 Want a cheap rebuild - barter. Old man swapped a 4.5 diff we were not going to use for a set of over size pistons, Hastings rings, and rods for a 4K. I got my I on a 4K at work that has never been fired in its life....... Quote
chrisandliz[RL] Posted July 17, 2006 Author Report Posted July 17, 2006 Want a cheap rebuild - barter. Old man swapped a 4.5 diff we were not going to use for a set of over size pistons, Hastings rings, and rods for a 4K. I got my I on a 4K at work that has never been fired in its life....... thats my style :cool: , but the limited amount of WA members the only people to trade with like dan, lappy, TWINCAM87, Mitch, madrolla68 and the other jounior sedan boys(sorry if i forgot any one) . And i don't think any one has 3T parts laying around big shout out to dan for the engine trade, got it in last week and i'm spewing :jamie: (coz it running better than ever :lol: ) why did i paint it yellow, it's frigen hard to keep clean Quote
Dan Posted July 17, 2006 Report Posted July 17, 2006 Haha, no worries man.. thought the yellow would be a bitch to keep clean, whats it in, your kesev? And naaah, no 3T bits lying around my place :jamie: Quote
roids70 Posted July 24, 2006 Report Posted July 24, 2006 i know someone has probably said this already but i just got a full rebuild kit priced for my 3tc and its about 600 bucks for everything including oversized pistons, anoother 100 bucks for the acid dip for the block and it to be bored, so there's 700 bucks for me and i can also get the head checked over for free, but i got a rebuild kit priced with standard pistons and its about 550 ish, so i don't know how much cheaper without pistons it will be, but.. u will be very lucky if u can get a rebuild kit without pistons, unless u wanna buy everything sepereatly, but u never know they could have something like that Cheers sean Quote
chrisandliz[RL] Posted July 24, 2006 Author Report Posted July 24, 2006 i had to bite the bullet and spend $55 on the ACL ring :P i'm getting the head done for $110, and the gaskits and oil seals are costing $45. so my cheap ass rebuild cost me $210 :P so a little over budget Quote
irokin Posted July 24, 2006 Report Posted July 24, 2006 Caws if you didnt you'll have the engine open again pretty soon.... Quote
chrisandliz[RL] Posted July 25, 2006 Author Report Posted July 25, 2006 did you get it honed? should have said so before. Thanks madrolla68 for the horning and advise, your a top bloke :P Thanks everyone for your advise too. :) btw i found out why this 3tc lacked power and was giving a kiss of smoke. some one put the compression ring and oil ring in all lined up!!! :P Quote
Dan Posted July 25, 2006 Report Posted July 25, 2006 Thanks madrolla68 for the horning and advise, your a top bloke Didn't know you were into that mate :P So who did your honing? :P Quote
madrolla68 Posted July 25, 2006 Report Posted July 25, 2006 Didn't know you were into that mate :P So who did your honing? :P I did Dan,de-ridged it and honed it for him mate. Quote
Dan Posted July 25, 2006 Report Posted July 25, 2006 Yeah mate, I know you did, I know chris is f@$king happy with the job you did too.. pretty sure you didn't horn it though :P Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.