Nutta1 Posted May 18, 2016 Report Posted May 18, 2016 can a 4k motor be bored out 60 tho safely. Quote
7000rpm Posted May 18, 2016 Report Posted May 18, 2016 Yes if the bore is still the original size being 75mm Quote
snot35 Posted May 18, 2016 Report Posted May 18, 2016 What? He means over bored 60 thou, or roughly 1.5 mm to 76.5mm. Quote
altezzaclub Posted May 19, 2016 Report Posted May 19, 2016 Some people have used 5K pistons at 81mm... although I wouldn't guarantee it for all blocks. Quote
filfrederick Posted May 22, 2016 Report Posted May 22, 2016 Most blocks will be fine, any decent engine machining workshop will have a sonic tester to measure bore wall thickness. it is a very simple process that is not hard or expensive. anything above .140" wall thickness after boring is adequate. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.