mexr69 Posted March 8, 2014 Report Posted March 8, 2014 (edited) Hey guys recently bought my third rona! I paid 200dollers for it body is super straight no filler in her at all! Planning to put a 3sge beams OR a hilux 3rz!!! into her or a sr20det vct as i already have the sr but from what ive read sr is more fvcking around!! so pretty sure ill be going with the 3sge pure n/a warrior ! Okay so firstly i put her on club rego yay!! Now full respray...Going with straight white. Then suspension... s13 lca coil overs tie rod etc.. But from what people say the s13 set up is shit? but its the cheapest option.. been told BC AE86 is probably my best option keep it toyota they say cost abit more but will it be worth it???? ......weld on front kit, cut standard struts and weld kit onto spindle, drill couple holes in your strut top, full AE86 BC kit and be done with it for around $1200 thats rear shocks and springs Also need help on break upgrades. Cheers. Edited March 10, 2014 by mexr69 Quote
breto Posted March 8, 2014 Report Posted March 8, 2014 Nice work, look forward to reading updates. Oh and don't put another Nissan motor into a Toyota pleeeeeeeeeeeease. Quote
mexr69 Posted March 8, 2014 Author Report Posted March 8, 2014 (edited) Nice work, look forward to reading updates. Oh and don't put another Nissan motor into a Toyota pleeeeeeeeeeeease. Wont be going with the sr20! been there done that with the silvias haha.. Edited March 10, 2014 by mexr69 Quote
B.L.Z.BUB Posted March 8, 2014 Report Posted March 8, 2014 Looks good, way better than that POS red thing. Quote
B.L.Z.BUB Posted March 8, 2014 Report Posted March 8, 2014 Land cruiser calipers should bolt on. Quote
B.L.Z.BUB Posted March 8, 2014 Report Posted March 8, 2014 I was gonna put them on my XT130 struts so I am guessing they will fit on the ST. What calipers does it have on it now? Quote
mark1414 Posted March 8, 2014 Report Posted March 8, 2014 RA60/MA61 calipers and rotors bolt on the front. Cheap and way better than stock. Quote
mexr69 Posted March 9, 2014 Author Report Posted March 9, 2014 (edited) I was gonna put them on my XT130 struts so I am guessing they will fit on the ST. What calipers does it have on it now? it has factory breaks on it atm, was going to go with the s13 front end set up and use the sr turbo breaks n hubs buteveryone tends to diss the s13 set up for some reason so I'm just gonna go with the 86 coils.. Edited March 9, 2014 by mexr69 Quote
mexr69 Posted March 10, 2014 Author Report Posted March 10, 2014 So i had a bit of rust on the front driver side quarter guard so i thought stuff bogging it up ill replace her with a new one! And look what i happen to found!!! damn i was in this car driving it around I'm guessing theres more inside the car!!! Car is almost fully sanded and ready for primer!!!! can't waitttttttttt!!!!!!!!!!!!!!!! till shes nice n clean Quote
YRO11A Posted March 11, 2014 Report Posted March 11, 2014 landcruiser/hilux calipers will not bolt on to st141 struts only xt130/rt132 celica is the cheep option, r33gtst calipers also bolt on, if you go s13 the the r33 swap is even easier Why not just shorten and coilover sleeve your stock struts? also I think you need to play with old cars more, that redback nest is tiny Quote
mexr69 Posted March 12, 2014 Author Report Posted March 12, 2014 (edited) landcruiser/hilux calipers will not bolt on to st141 struts only xt130/rt132 celica is the cheep option, r33gtst calipers also bolt on, if you go s13 the the r33 swap is even easier Why not just shorten and coilover sleeve your stock struts? also I think you need to play with old cars more, that redback nest is tiny haha mann i hate spiders!Ive already got all my s13 gear man ready to go! just need coil overs Edited March 14, 2014 by mexr69 Quote
mexr69 Posted March 16, 2014 Author Report Posted March 16, 2014 (edited) yooo!!!! So time has came, car is finally in primer! woooooo! S13 front end is now in just needs minor adjustments!. Next on list is rear end suspension. Unsure what to run in the rear? been told hilux shocks with commodore/ford springs? Edited March 16, 2014 by mexr69 Quote
mexr69 Posted March 16, 2014 Author Report Posted March 16, 2014 (edited) . Edited March 16, 2014 by mexr69 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.