Feral4K Posted July 1, 2015 Report Posted July 1, 2015 Are there still 3 locating screws on front panel for the headlamp bucket? Mine was missing one on the drivers side that i had to weld a new mount on for otherwise there was not enough to hold it on... Quote
Rollake10 Posted July 1, 2015 Author Report Posted July 1, 2015 Are there still 3 locating screws on front panel for the headlamp bucket? Mine was missing one on the drivers side that i had to weld a new mount on for otherwise there was not enough to hold it on... No. Both sides have two adjustment screws and then theres spring behind to hold it. thats how I thought its supposed to be. Problem is that I need to get the bucket to rotate so it would not hit to the chrome trim holding brackets. Oh and the bucket only haves holes for two adjustment screws! Thats how it's supposed to be, right? Then a small hole for a spring? Quote
Rollake10 Posted July 1, 2015 Author Report Posted July 1, 2015 (edited) Rookies mistake! I have used wrong holes. I used the ones with M8 thread, not the ones that you put the plastic backing pieces to the slots. Problem solved I think, but I only had one of those plastic backing pieces.. I'll try to find some more from finnish toyota forum. Now that I have solved the mystery of my head lamps I need to get the engine running with the new carb from 68' Crown :) E: Or I just file the round holes to square and put the ebay adjustment screw plugs in.. Edited July 1, 2015 by Rollake10 Quote
Rollake10 Posted July 7, 2015 Author Report Posted July 7, 2015 Now I just need to find upholsterer who would make my roof finished so I can get my windows on. Quote
Rollake10 Posted July 13, 2015 Author Report Posted July 13, 2015 From what year of an Galant did the brake master cylinder fit to ke10? How much longer is the MC? (LHD problems..) Is that MC boosted? The original is leaking even tought I changed all parts inside it.. Quote
parrot Posted July 13, 2015 Report Posted July 13, 2015 There was a discussion about your exact issue just recently http://www.rollaclub.com/board/topic/71689-master-brake-cylinder-ke10/ Quote
Doogs Posted July 13, 2015 Report Posted July 13, 2015 (edited) Great project, the body has come up really well with those flares :y: Looking forward to more updates. Edited July 13, 2015 by Doogs Quote
Rollake10 Posted July 26, 2015 Author Report Posted July 26, 2015 So Corolla is finally working good. Had to change the alternator today. Idle is around 1000-1200 rpm but I'll try to get it even at 1000. In the end of the video you can see tomorrows project.. the roofs upholstering. Wish me luck as I just twisted my ankle really bad! :oops: Atleast I have friends helping me. We'll see how the roof comes out as we're doing it bit different and unproffesional style. 1 Quote
67Rolla-Ken Posted July 29, 2015 Report Posted July 29, 2015 Great work! I hope the ankle doesn't slow you down too much :( Quote
Rollake10 Posted July 29, 2015 Author Report Posted July 29, 2015 (edited) No worries it did not slow me down at all :) (I'll just link all the photos as photobuckets editor doesn't work and the photos are too big..) Roof is coming out nice! I first glued 3cm thick foam to the roof like this: http://i1123.photobu...zpsqynoioma.jpg next was 1cm thick foam wich I used to make the shape of the roof: http://i1123.photobu...zpsfktumc47.jpg If you are interested you can go to my photobucket and watch more pictures, but basically I measured and centered the large foam pieces to the roof and then glued them to roof and cut them to shape. Ofcourse I could not had done this all by myself, so thanks to my friend Olavi and my girlfriend Jenna :) Today my girlfriend and I are doing the c-pilar vinyls and maybe trying to do the whole roof. I'm so excited because after the roof is done I can just put the windows to place and register the car! And I tought that I wouldn't drive this car this summer :P By the way I bought this boot lid rubber from thailand (I know they are not good, but I'll give it a try) how are you supposed to assembly it? glue it on or something? http://i1123.photobu...zpsqyobwc55.jpg Is this even how it is supposed to be? Edited July 29, 2015 by Rollake10 Quote
greenmac80 Posted August 12, 2015 Report Posted August 12, 2015 flares are cool as. give it a bit of an 'escort' feel. Quote
Rollake10 Posted August 13, 2015 Author Report Posted August 13, 2015 My horn fuse pops immediately after I put it there. I have checked horns, brake lights, Indoor lights etc. Which connects to the same circuit as horn fuse.. I'm thinking that some wire has to be broken and touching ground.. does anyone know if theres a typical spot for wires to break or if I should check something else. I'll post pics of the done interior and car later today Quote
Rollake10 Posted August 14, 2015 Author Report Posted August 14, 2015 Wires checked,didn't see anything anusual. Now my alternator broke again. Does anyone have a clue of whats going on? Quote
Rollake10 Posted August 14, 2015 Author Report Posted August 14, 2015 False alarm! The Cigarette lighter was in wrong wires so thats why it popped the fuses.. still don't know why the alternator doesn't work. Quote
Rollake10 Posted August 19, 2015 Author Report Posted August 19, 2015 Does anyone know what is the "extra" blue wire coming from the voltage regulator? Still having problems with charging. This is the second alternator in month, they both have died when the car has not been running or when starting. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.