ke70-slider07 Posted January 10, 2013 Report Posted January 10, 2013 (edited) Hey all would like to see how your wiring is run. And also what plug goes where as the guy i got my motor off did not mark anything Alright new topic i need help with some wiring plugs and whether or not i need them still i will post pics here. Any help appreciated Edited February 23, 2013 by ke70-slider07 Quote
rian Posted January 10, 2013 Report Posted January 10, 2013 This thread contains all the info on the plugs: http://www.rollaclub.com/board/topic/57690-need-help-4age-16v-bigport-loom-plugs/ And this is how I ran the wires in my engine bay: Quote
ke70-slider07 Posted January 10, 2013 Author Report Posted January 10, 2013 Awesome thanks mate your a lifesaver Quote
ke70-slider07 Posted January 10, 2013 Author Report Posted January 10, 2013 Is that a fwd loom? Quote
rian Posted January 10, 2013 Report Posted January 10, 2013 It was a FWD loom, but I removed all the tape and conduit and then rearranged it as best I could without shortening or extending any wires, then I taped it all back up and fitted some new conduit. It seems to fit reasonably well, it would have fitted better if I shortened/extended some parts of the loom but it was too much work. Quote
ke70-slider07 Posted January 10, 2013 Author Report Posted January 10, 2013 Awesome what side of the firewall does it come through Quote
ke70-slider07 Posted January 12, 2013 Author Report Posted January 12, 2013 Woops can't believe i missed that. Its a ke70 wish i started with an ae tho haha Quote
gt500biatch Posted January 15, 2013 Report Posted January 15, 2013 iv got a 20V in a ke70 iv had to make mods to the firewall to get it to fit plus cut the loom, do you have a FWD loom or RWD loom ? and is yours a 16v? if it is i do have a RWD 16v loom and ecu at home if you want to buy it, i can show you how it wires up near the passenger floor i think. Quote
ke70-slider07 Posted January 15, 2013 Author Report Posted January 15, 2013 16v bigport Still fwd loom got ecu ill slowly figure it out lol Whoever "unplugged" this loom broke half of the plugs so a rwd loom would be good to aquire lol Quote
gt500biatch Posted January 15, 2013 Report Posted January 15, 2013 pm me, iv got 1 and an ecu with mounting brackets etc I'm in calamvale brissy Quote
ke70-slider07 Posted February 23, 2013 Author Report Posted February 23, 2013 Alright guys need some more help first post updated Quote
rian Posted February 23, 2013 Report Posted February 23, 2013 (edited) 1st pic: not sure? Don't think I used it in my conversion. 2nd pic: TVIS plug. 3rd pic: big white 2 pin plug: black wire with white trace connects ignition barrel to starter motor. Thick white wire I'm pretty sure connects to AM2 on the ignition barrel. All the other plugs: I'm not sure, but I don't think I used any of them in my conversion. Also, you seem to be missing the third ECU plug. If you need to find one, SV21 Camrys share the exact same ECU plugs. EDIT: if you haven't already got them, you'll need these: http://www.rollaclub...Wiring_Diagrams http://www.rollaclub...ies/ECU_Pinouts Edited February 23, 2013 by rian Quote
ke70-slider07 Posted February 23, 2013 Author Report Posted February 23, 2013 Yeah ive got the plug have a full interior loom with the plug to adapt. One of those links show what i have to connect? Quote
rian Posted February 23, 2013 Report Posted February 23, 2013 The first link has everything you need to wire a bigport 4AGE into a KE70, but it takes a while to figure out which wire is which. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.