Jump to content

Recommended Posts

Posted

i am not one to whinge about deals, i know i cop it sweet, the onus is on me to make sure the car up to the standard of what i am expecting

but holy fck... this is by far, the worst, dodgiest car i have ever seen..!

seriously, everything i see, has been done wrong, or by half..

the more i look into it, the more i want to die..

today, i start raising the rear, flipping the leaves back, etc.

521362_4696168573961_134994420_n.jpg

the fcking thing was that low, the tailshaft had nearly worn through the floor, the diff sat hard on the floor, no rear suspension at all

 

the leaves were flipped, the top one with the mounts

430941_4696169053973_2086241162_n.jpg

they had cut through the mount support so it could be done this way, thus weakening the whole spring setup, pic below

407371_4696169373981_1280449446_n.jpg

Members dont see this ad
Posted

while under there, i noticed the rear brake splitter had one line welded up

305391_4696169573986_774995079_n.jpg

425418_4696170494009_1232504509_n.jpg

thus making only the drivers side hooked up

428791_4696169893994_473711442_n.jpg

passenger line wasnt there..

Posted (edited)

184446_4696169253978_214564581_n.jpg

fuel pump 'wiring'

as i was dropping the car back down, this put pressure on the way he had the fuel lines hooked up, pulling the line down and separated it, spraying fuel all over my head, down my arm into my arm pit....

 

also the exhaust was made to go under the diff, as it was so low, so when i raised it up, it sat on the exhaust, so i had to cut it off before the diff..

will get an over the axle bend made up i spose...

282906_4696169773991_119988088_n.jpg

height raised for the RWC

after getting the rear sorted, i started on removing the clutch master cylinder to replace it

took me 4 hrs.. trev had to come finish it off due to a brain fart of mine.. was numb at this stage and wanted to punch a hole through it

 

i really want to Hug Luke or Kyle in the neck, with a fist

tho I'm sure they will pass the buck, saying the other was responsible

Edited by nerfbat
Posted (edited)

oh, the bloody shudder was the tailshaft bolts loose and nearly coming off....

lucky to be alive, after driving it home that night in the wet, like that

 

 

the exhaust leak, it's the O2 sensor has fallen out.

 

so close to going for a drive and patting these guys on the back, with a chair..

diliberately hid the dodgy sht and could have caused death or serious injury....

Edited by nerfbat
Posted

yeah....

and i take responsibility for not going through it fully.

in my defence, it was raining, and dark, and he was asking $6,000 so i assume it had some 'Quality'

ah well, enough whingeing...bourbon O'clock, then sleep, before getting into it again tomorrow....

Posted

This is exactly why I gave up looking for a 4AGE KE70 to buy and just did my own 4A conversion. That sucks man, I hope you don't find any more dodgey mods.

  • Upvote 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...