TOMMYS Ke 11 Posted October 23, 2012 Report Posted October 23, 2012 Hi just wondering if anyone has brought any of the guards from ROTARY products and what they are like ??? any info would be greatly appreciated thank you. Cheers:- Stuart. Quote
styler Posted October 23, 2012 Report Posted October 23, 2012 (edited) Go have a look if you can, it's a mixed bunch... Was something like heaps of one side but not the other and heaps of early or late models for ke20/ke25's.... some are good, some need work. was told they are genuine and its possible but my gut feeling says aftermarket. Are you after one side or a pair? Early or late? Edited October 23, 2012 by styler Quote
TOMMYS Ke 11 Posted October 24, 2012 Author Report Posted October 24, 2012 Hi there Styler i have a 1973 ke25 that is about to get the full treatment and was looking for both guards and 2 better doors if i can get hold of any other wise i wiil repair the ones i have. There just a little to far away to have a look as we live in Swan Hill Victoria they addvertise they are genuine NOS Toyota guards and have both in stock???. Thats why i was wondering if anyone has brought any from them and can vouch for there quality before i go and order them. Cheers:- Stuart. Quote
PHATKE20S Posted October 24, 2012 Report Posted October 24, 2012 I have been there very recently chatting with Phil (the owner) & he mentioned that his stock was running low so i would suggest getting your order in soon. From what i have seen they look like NOS not reproduction..... Quote
TOMMYS Ke 11 Posted October 24, 2012 Author Report Posted October 24, 2012 Hi thanks for that Dougy i will get my order in for a pair of guards so as i can start to get things ready for project FOROLA??? can't give to much info out at this stage but will do a full build thread when we are well into it,lets just say this will be different. Cheers:- Stuart. Quote
Tally Posted October 24, 2012 Report Posted October 24, 2012 (edited) to my knowledge its all aftermarket Thailand crap, does not fit good at all. stick with the original guards and doors Edited October 24, 2012 by Tally Quote
styler Posted October 24, 2012 Report Posted October 24, 2012 I actually went through the whole lot of them one by one, I will see if I can remember the details of them and post up later... Quote
styler Posted October 25, 2012 Report Posted October 25, 2012 (edited) Ok. Went through about 30 of them, was told they were NOS and could be but could also likely be old aftermarket in my opinion. They are old either way, some have surface rust and some have quite a few dings or scratches but they are light and easily fixed, not perfect or new by any stretch of the imagination, each piece varies in condition. There was from memory: few late passenger side many late driver side few early passenger side few early driver side few te27 style ones Early and late can be interchanged: Early > Late: Fit later corner garnish and cut out hole for side indicator. Late > Early: Weld up side hole for indicator and cut out hole for early corner garnish. Te27 style ones have a fender mirror hole and the side indicator hole is much higher up. Now just be careful as they do vary in condition, some are warped and some have actual proper rust not just surface rust and others have more than a few dents but hey it's rare stuff and the price reflects that so it seems. It's not a listed part number or an off the shelf regular item, it's more like an inspection purchase of sorts. Edited October 25, 2012 by styler Quote
parrot Posted October 25, 2012 Report Posted October 25, 2012 Sorry Styler, bit stunned. By TE27 style you mean the guard lips are not there and instead are pressed to accept the bolt on flare? May be asking a bit much, but can you recall the condition of these and whether there was passenger and driver available? My experience with Phil's is that receiving info remotely is pretty unreliable...... Quote
styler Posted October 26, 2012 Report Posted October 26, 2012 Hmmm can't fully remember but I presumed te27 as there was a fender mirror hole pre drilled and the side indicator was much higher up than early / late ke25. Could be a aftermarket version of te27 made from the blank though ie same pattern but different holes not sure. Quote
parrot Posted October 26, 2012 Report Posted October 26, 2012 I might need to give them a call and see what they can tell me. I have a rusty drivers side levin guard here I was going to repair, but at a minimum need a passenger side, if not both. Quote
styler Posted October 26, 2012 Report Posted October 26, 2012 Heres the pic, its the te27 trueno's had the high side indicators and no garnish. Quote
styler Posted October 26, 2012 Report Posted October 26, 2012 Also rare spares does ke20/ke25 lower guard repair sections for about $50 a side last I looked. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.