Help Identify Strut

[brm]

I need some help in identifying this strut.

 

I have searched wreckers comparing various struts and found none that match.

 

Dimensions are as follows:

 

Steering arm/Ball Joint mount bolt hole centres 85mm

 

Brake caliper mount bolt centres 89mm

Thread in strut 12 X 1.5 mm could have added as all caliper mounts I have seen have thread in caliper slide not strut

 

Stub axle bearing diameters: Inner bearing 31.5mm Outer bearing 19mm Seal 48mm

same as XT 130 and other large stub axles I have seen

 

Tube diameter 51mm

 

Part number shown on tube TOYOTA -340.4.8.084

 

From my investigations I can rule out the following vehicles

 

XT130

KE 70

ST141

MX73

Celica I am unsure of exact model 62 or 63????

 

Need your help to match these and find another pair to make into coil overs.

 

 

Thanks Ben

[Paul]

From the photo's they look like XT130/RT132, which measurement has ruled that out? I know the caliper bolt centres are 89/90mm on *T13* struts because you can use MX62 Cressida calipers and MA61 discs with some very simple mods.

[LittleRedSpirit]

88.9mm is the measurement. Its 3.5 inches.

 

3.5x 25.4mm = 88.9.

 

XT130 struts feature a cast on caliper mount and that spacing.

[Paul]

 

XT130 struts feature a cast on caliper mount and that spacing.

 

Great for milling front surface flat, drilling through holes and running spacers to use MX62 caliper on MA61 disc. Running that upgrade in my pano.