Rollajones Posted June 17, 2012 Report Posted June 17, 2012 This may be a stupid question but as I have no clue don't hate on me. I want to fit extractors to my ke70 and was wondering if I will need a different exhaust than stock? Because I'm on my p's I don't want it to attract attention with a different exhaust Quote
Jono.C Posted June 17, 2012 Report Posted June 17, 2012 Nope. Any exhaust shop will be able to make it work with your factory system. Quote
bruce Posted June 18, 2012 Report Posted June 18, 2012 After the collector on the extractors it's a 2 inch pipe. An exhaust shop could connect the 2" end to the smaller stock pipe. Though while your at it you could have 2" all the way for a better free flowing exhaust, and have two mufflers to quieten it down. Shoudn't be too loud with a good note. Quote
altezzaclub Posted June 18, 2012 Report Posted June 18, 2012 Extractors won't do much without a larger exhaust system. I ran the 2" extractors into a 2" resonator to start with, and welded that into the stock system. It was 6months or something later that I put inch & 3/4 to the rear, and THEN it made a difference. Its got a nice growly sound but is not noisy enough to be noticeable. Quote
Jono.C Posted June 18, 2012 Report Posted June 18, 2012 It's worth it just to get rid of the hotbox gasket and the 3 bolt flange Quote
Taz_Rx Posted June 18, 2012 Report Posted June 18, 2012 It's worth it just to get rid of the hotbox gasket and the 3 bolt flange Bingo! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.