7shades Posted August 18, 2012 Author Report Posted August 18, 2012 (edited) So I actually did something to this thing today other than drive it This is yucky and green. New polycarbonate, trimmed to size Clock is also yucky green. Remove yucky green plastic, replace with another bit of polycarbonate, tinted red Fitted to bezel, holes drilled for odo reset and clock adjust Little grommet thingies back in, also ran a bead of hot glue around the edges to keep dust out That's betterer All fitted up. Soooo much clearer and modern-looking than the factory one. Cluster surround repainted with bumper finish black. Also note the large bit missing where the radio goes... There's actually another piece of polycarbonate there. I cut out that entire section above the air vents and flush fitted the polycarbonate to the cluster surround, on the back side. There will be gauges in there, once I get around to making a mini-cluster of sorts which matches the factory one. Oh and I made everything red. I like red. Very red. Edited August 18, 2012 by 7shades Quote
B.L.Z.BUB Posted August 18, 2012 Report Posted August 18, 2012 (edited) Been wondering how to make my clock blue! Edited August 18, 2012 by B.L.Z.BUB Quote
Jono.C Posted August 18, 2012 Report Posted August 18, 2012 So... Technically... You're always kinda on red-line now? Quote
7shades Posted August 18, 2012 Author Report Posted August 18, 2012 Yeah its just the green plastic. Although... It a bit dimmer now. I'm not sure if that's because I over-tinted the redness, or the old school display just works better with green.... Still perfectly legible though. Quote
LongJohnSilver Posted August 18, 2012 Report Posted August 18, 2012 So... Technically... You're always kinda on red-line now? :lolcry: Quote
swampgarage Posted August 18, 2012 Report Posted August 18, 2012 Now you've had some practice, make me one! Quote
B.L.Z.BUB Posted August 18, 2012 Report Posted August 18, 2012 I was gonna pull mine apart and wrap the face with fake carbon fibre for lols so might do that at the same time. New clear front is a good idea too. Quote
LittleRedSpirit Posted January 15, 2013 Report Posted January 15, 2013 (edited) The panelvan cluster has a curved face whereas the sedan n wagon cluster has a flat one. So I'm sure you could fab something up but it would require the ability to thermoform the polycarbonate to get the curved face correct if you wanted to make a clear screen for a van. Edited January 15, 2013 by LittleRedSpirit Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.