ghettochild LG Posted February 6, 2012 Report Posted February 6, 2012 Hi I am new to this site I have been looking for a 3kr engine for a little while and I found only one place to get one, the person who has it is thinking of sending the 3kr cylinder head to be reproduced so I was wondering if there would be 100 people who would be interested in a reproduction of a 3kr head and internals I need to find out about pricing but the person said just for the casting of the head wouldn't cost too much but reproduction of cams pulleys and so on will be needed. I will try and research where to get 3kr internal parts built let me know if anyone is interested, I will get back to the person and ask if the quote's been recieved for casting them I know my kp61 rwd starlet is lacking power so a 3kr would be dope cheers Liam 1 Quote
nerfbat Posted February 7, 2012 Report Posted February 7, 2012 i had to google to refresh my memory http://retroscenemag.com/post/Toms-3K-R-Engine.aspx holeee sht..! Quote
67Rolla-Ken Posted February 7, 2012 Report Posted February 7, 2012 (edited) Definitely interested depending on price. edit: Any idea how much taller this would be to the stock engine? Will it still fit in a KE10?? Edited February 7, 2012 by 67Rolla-Ken Quote
Clapped out Posted February 7, 2012 Report Posted February 7, 2012 interested depending on price +1 Quote
altezzaclub Posted February 7, 2012 Report Posted February 7, 2012 Are you going to get it made for 3K or 4K?? What else do you expect to need to make it run? You could sell a complete kit ready to install for a few thousand bucks I suppose... easiest to use 4AGE valves/guides/seats/seals/cams, everything in fact! Assuming its a 3cam motor to keep the original cam for dizzy/oil pump, will you use one timing chain on all 3 or a separate setup for the head?? Quote
67Rolla-Ken Posted February 7, 2012 Report Posted February 7, 2012 If this starts to look serious can we please sticky this to the top :) Really want to see this happen... just imagine all the RC members running 180hp 3K engines :yes: Quote
nerfbat Posted February 7, 2012 Report Posted February 7, 2012 (edited) agreed mate..! even bill Sherwood's site touches on them briefly, this image stolen for there: http://www.rollaclub.com/board/topic/17848-3kr/ Edited February 7, 2012 by nerfbat Quote
Jono.C Posted February 7, 2012 Report Posted February 7, 2012 Shows how much more potential, And how much better K motors would have been with a better or crossflow head design, Even in single cam form.. Quote
GJM85 Posted February 7, 2012 Report Posted February 7, 2012 You can't just replicate the top end of this thing... timing cover, sump, upright kit, manifolds, water and oil pump and pickup. I'd guess its bottom end is built like that of an... f1 car. Then there's ignition & fuel system, crank gear, cam gear, cams, followers, valves, stems & seals, rocker cover. Shit the list goes on. You'd have to be real keen because i'd estimate five figures each. I don't mean to dash hopes but the block alone probably needs thousands spent on it. It wouldn't be running a stock crank or bearings for sure. You could expect to be building an engine from scratch.... Good Luck any how. 2 Quote
nerfbat Posted February 7, 2012 Report Posted February 7, 2012 http://youtu.be/R_SkekfNdZ8 watch this awesome vid on the thing. scary sht...! Quote
Sam_Q Posted February 7, 2012 Report Posted February 7, 2012 watch everyone disapear when the real prices are revealed. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.