Jump to content

Recommended Posts

Members dont see this ad
Posted (edited)

They're K motors. Unless you've built it borderline about to explode you could use a jam jar with a rag in it as a filter.

 

Plus non toyota ones from Repco are like 10(?) bucks.

Edited by B.L.Z.BUB
  • Upvote 1
Posted

;) bullet proof they are but noticed using cheap filters the engine oil light takes longer when starting up due to the checkvalve been better on Toyota filters from factory. My old 4kc is still going using factory filters just had HG changed at 420,000 with hone marks still good, good comp and now just over 600,000klms for the old tractor :))

Posted

If you mean the Toyota filters, they are straight from a Toyota dealer or any helpful member of Rollaclub who works at Toyota... i bought half a dozen from one of our members after the oil filter on the car (covered in Japanese writing) let the filter drain each night. That marked the bearings as it filled up every morning with no oil pressure and eventually I replaced the bearings.

Posted (edited)

I had a similiar issue when using a ryco oil filter on the ke70, the oil light would stay on just those few extra seconds when starting hot/cold. Then I inquired at my nearest dealer about a genuine unit and was told there were two types. One being the (90915yzze1) made in Thailand - this filter is a small unit but is applicable to the 4k. Price was $18.00 give or take.. I still bought it as it could be put on a ae92 which I also have..

 

Then there is the large type filter produced in Japan for $21.00 or so which I have put on and since then the oil light only flashes on cold/hot starts. But I think even if you went with the samller 90915yzze1 it would do a fine job on the 4k anyhow and be slightly cheaper:y:

 

Ebay link to a bulk purchase: While the listing dosent say 4k or 5k it says so on the box..

http://www.ebay.com.au/itm/90915-YZZE1-Genuine-Toyota-Oil-Filter-X10-Camry-Corolla-/380339938732?pt=AU_Car_Parts_Accessories&hash=item588e06e5ac

 

EDIT: Photos of the yzze1, 4 and 5k compatible.

S5004062.jpg

 

S5004061.jpg

Edited by Ben-89
Posted (edited)

I bought half a dozen (90915 YZZD2) 90915-10003 so they must be the option. Maybe we can start a Group-buy from a mechanic/sales rep on here.

 

Edit- (The YZZD2 is for the Altezza/Celica, I grabbed from the wrong pile in the garage!)

Edited by altezzaclub
Posted

Anyone in brisbane PM me if you need genuine oil filters a E1 is about $12 I think to me a D2 that I used on my 3t was about $14 maybe couple of bucks more not sure.

 

If you want me to get some would probably be better off getting a few at once.

Posted

Noo!! ! I'm afraid I grabbed the wrong one off the shelf last night! The YZZD2 is for my Altezza, the 4K ones I have are 90915-10003, for 4K and 5K series.

 

I'll go back up and edit my earlier post.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...