Jack_ke30 Posted December 14, 2011 Report Posted December 14, 2011 can anyone tell does a t50 gearbox fit into 4k??and how?? Quote
B.L.Z.BUB Posted December 14, 2011 Report Posted December 14, 2011 Yes but you need a K-T bellhousing. Quote
Jono.C Posted December 15, 2011 Report Posted December 15, 2011 I have a hydro K-T bellhousing i may sell. If you're keen PM me. Quote
Jack_ke30 Posted December 23, 2011 Author Report Posted December 23, 2011 I have a hydro K-T bellhousing i may sell. If you're keen PM me. is it fits onto ke30 stock long shaft?? Quote
Jono.C Posted December 23, 2011 Report Posted December 23, 2011 Sorry mate, already sold. And it was just the bellhousing. You'd have had to have bought a t50 as well. T18/ta22 are the same spline as a corolla tailshaft if that helps you. Quote
corollaart Posted December 24, 2011 Report Posted December 24, 2011 You need to also convert to hyd clutch,unless you can find a cable type housing,but are very rare. If you use a ta22 box the shifter position is a perfect fit in to the original hole. Use the 30 rear cross member,just move it back to the rear factory holes . Tail shaft will fit if useing the early t50 box. I had to get longer bellhousing bolts as well,the kt housing is a bit thicker than old k40 bellhousing. Also need a different clutch plate (PBR-7098W) Easy job all bolt up the biggest pain is converting to hydo clutch. Quote
corollaart Posted December 24, 2011 Report Posted December 24, 2011 No mate not new ,just wire wheel on a drill while drinking beer. Lots of beer ,beer is good :laff: Quote
Jack_ke30 Posted December 30, 2011 Author Report Posted December 30, 2011 thankk you all for your feedbacks... :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.