B.L.Z.BUB Posted January 22, 2012 Author Report Posted January 22, 2012 I noticed your not running a Oxygen sensor either , this is crucial to get Air/Fuel ratio's correct , Running without these sensors put the car in Get home/limp type Mod , Add the Oxy , Speed sensors & tune it & I think it should go better , The O2 sensor was gonna get done, the speed sensor is news to me (*adds it to the list). And just to keep with every other post I put on here something broke. The exhaust hangers at the rear snapped off making the next rubber set pop off the mounts. Man it was loud rattling against the panhard rod all the way home. But all this aside and all the things I have to do its running a hell of a lot better than it was. Quote
madKE35coupe Posted January 22, 2012 Report Posted January 22, 2012 is it going to make it down to warwick on friday night? or do i need to keep a car trailer handy? Quote
B.L.Z.BUB Posted January 22, 2012 Author Report Posted January 22, 2012 It'll make it. It'll probably break a few components on the way though. Quote
madKE35coupe Posted January 22, 2012 Report Posted January 22, 2012 well we shall have an arsenal of tools here and the rc pit crew of course Quote
rian Posted January 22, 2012 Report Posted January 22, 2012 What is this speed sensor that is being spoken of? Quote
B.L.Z.BUB Posted January 22, 2012 Author Report Posted January 22, 2012 (edited) What is this speed sensor that is being spoken of? Makes the car rev higher. Though I should get a diagnostic warning if mine isnt operational and I'm not. Actually i just did another one and I'm getting 2.3.5.6.9.10. Nice http://www.ae82.net/showthread.php?2512-4age-Diagnostic-System-(AE82) Edited January 22, 2012 by B.L.Z.BUB Quote
rian Posted January 22, 2012 Report Posted January 22, 2012 (edited) 2.3.5.6.9.10. Edited January 22, 2012 by rian 1 Quote
ijg033 Posted January 22, 2012 Report Posted January 22, 2012 The Speed sensor I had fitted to the Speedo cable was just a Universal VDO unit (As was advised to be suitable), I wired it to the Computer as per Factory , At the time it cost around $100 , Good list of Codes there Reed , Minor crap really but all makes a difference , Cheers Dave Quote
B.L.Z.BUB Posted January 25, 2012 Author Report Posted January 25, 2012 Oil change. Trimmy trimmy. Really need a sawsall or a hacksaw as I only had a 4" grinder. Or ill put a couple of chrome tips on to tidy it up. Quote
Spencer[RL] Posted January 25, 2012 Report Posted January 25, 2012 Man up grinders are king ! Oil looks delishouzzzzzz Quote
B.L.Z.BUB Posted January 25, 2012 Author Report Posted January 25, 2012 Grinders are awesome but i couldnt get all the way through so had to hammer them into a position to finish them off, hence why it looks shit. Quote
chrisfindlay Posted January 25, 2012 Report Posted January 25, 2012 (edited) Bring those offcuts with you when you come down next weekend <3 ;) Edited January 25, 2012 by chrisfindlay Quote
rian Posted January 25, 2012 Report Posted January 25, 2012 (edited) ^ lol, scavenger BTW Reed when is the next cruise? Edited January 25, 2012 by rian Quote
chrisfindlay Posted January 25, 2012 Report Posted January 25, 2012 ^ lol, scavenger BTW Reed when is the next cruise? I prefer the term salvager! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.