rpm_sa68 Posted September 23, 2011 Report Posted September 23, 2011 does anyone know if its possible to convert 4x114 to 4x110 to suit Ke10 pattern? Quote
19914afc Posted September 23, 2011 Report Posted September 23, 2011 Pretty sure you could get spacers made up, I had some 4x100 wheels on the back of my car and had spacers that changed the stud pattern from 4x114 to 4x100. Either that or there are a lot of wheel manufacturers that sell wheels blank and then get them done in whatever stud pattern you want. Quote
coln72 Posted September 23, 2011 Report Posted September 23, 2011 Did something similar to my KE20 when I fitted later discs to it. Didnt want to replace my wheels as I had two complete sets. Unbolted the "hat" from the KE35 disc and fitted the KE20 item. Gave me the later model disc and caliper but with the early stud pattern. Had to stuff around with different combinations to get the caliper to disc spacing right, but it can be done. Quote
Jordain Posted September 23, 2011 Report Posted September 23, 2011 I have 4 spacers that I no longer use... converts 4x110 to 4x114.3... Quote
Redwarf Posted September 23, 2011 Report Posted September 23, 2011 What are you trying to acheive. I'm not real clear on it..... Quote
rpm_sa68 Posted September 23, 2011 Author Report Posted September 23, 2011 Thanks for feed back guys, How do spacers work? Do they widen the track at all when used? Quote
rpm_sa68 Posted September 23, 2011 Author Report Posted September 23, 2011 Red Dwarf.. I wish to Fit Watanabe 13x6 4x114.3 pattern to my Ke10 (4x110) Quote
Redwarf Posted September 23, 2011 Report Posted September 23, 2011 (edited) You should be able to buy 13x6 superlights (I know, slightly different) out of the box from Performance wheels in 4 x 110. Right fit, right offset. Spacers aren't ideal, and in many places, are illegal. http://www.performan...p=C&Cat=Classic Edited September 23, 2011 by Redwarf Quote
rpm_sa68 Posted September 23, 2011 Author Report Posted September 23, 2011 Exactly what I'm after cheers! :yes: Quote
mungi mods Posted September 23, 2011 Report Posted September 23, 2011 wheels can be inserted to change stud pattern, cost is around $80 a wheel Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.