4Agze Igniter + Leads

[saki]

Hey guys,

 

I'm currently on the hunt for a replacement set of Leads for GZE and where to source the igniters for the twin coil packs.

I'm currenlty running 1 stock and 1 aftermarket. But id like to return to running either 2x stock or 2 of the same rather thna random mixed up stuff..

 

Also a set of leads. Ive done quite a bit of searching and the magnacore obviously come up. Ive found Top Gun at repco also do a set, however they run a mix of leads for 4AGZE import motors. So best bet is to order in what looks close enough and go from there.

 

Is there any other advice people can offer in terms of this issue? My main reason for concern is the motor misses and doesnt run correctly and ive diagnosed it as bad ignition setup. I'm going to have a crack at modifiying few other bits and pieces, but best option would be fresh new parts.

 

Would it be a wiser idea to just go for something more readily available, like hyundai, LS1, 7MGTE coils ? rather than a stock unit ? I'm running a Wolf3d v3 with a hand controller.

 

Cheers guys

Edited August 19, 2011 by saki

[terryo]

the GZE igniter is rare and impossible to find when you need one in a hurry. whilst they reliable, i'd avoid them if you have a choice.

the wasted spark system is now obsolete if you have a modern ECU

you have a zillion coil choices really. the LS1 coils have built in igniters so we use them on lots of conversions