Mitch-12 Posted September 21, 2012 Author Report Posted September 21, 2012 the old engine mounts that the other guy made where shit so i made new ones :) Quote
dbr11k Posted September 21, 2012 Report Posted September 21, 2012 I've had 18x8 on a rolla with only a rolled lip, was a very tight fit but... Are you sure 10.5 are not going to rub on your front coilovers?? Will need to have adjustable lower control arms as far as you can out and camber tops adjusted to fix the negative camber you will get from doing it. Quote
dbr11k Posted September 21, 2012 Report Posted September 21, 2012 Especially if those rims are 15mm positive offset Quote
Mitch-12 Posted September 21, 2012 Author Report Posted September 21, 2012 already got all that sorted mate done this before on race commodores and you need some special stuff can't give away too much info Quote
Jono.C Posted September 22, 2012 Report Posted September 22, 2012 I'm not sure why youd spec this up so high ($8k gearbox etc) and then run it through cheap Rota wheels? Not sure on their quality these days but they used to smash the centres out all the time Quote
Mitch-12 Posted September 22, 2012 Author Report Posted September 22, 2012 Mca use Rotas on there s13 wtac car they must have gotten better quality Quote
Jono.C Posted September 22, 2012 Report Posted September 22, 2012 The Grids seem alright.. These were what i meant :S Quote
Mitch-12 Posted September 22, 2012 Author Report Posted September 22, 2012 Hmmm you may have a point.... Quote
B.L.Z.BUB Posted September 22, 2012 Report Posted September 22, 2012 (edited) You can throw up pictures of broken wheels all day but unless you know the context behind them its irrelevant, even a forged wheel will smash to pieces if you hit a curb with enough lateral force. Rota even make stock Toyota wheels. You can't even say they are a nothing brand, Rota wheels have been manufactured since 1977. Edited September 22, 2012 by B.L.Z.BUB 1 Quote
19914afc Posted September 23, 2012 Report Posted September 23, 2012 Not a huge fan of rotas myself but as above, any wheel can break, I have even seen a well known Japanese brand 3 piece wheel break similar to that before as well. I have even heard of rota not even asking questions about a broken wheel and just straight up replace them without any questions. Quote
philbey Posted September 23, 2012 Report Posted September 23, 2012 am I the only one noticing the kevlar barrel on that smashed rim? It's hardly a stock, off the shelf rota is it? 1 Quote
Jono.C Posted September 23, 2012 Report Posted September 23, 2012 There was photos of like grids and stuff but Rollaclub wouldn't let me link them? Yes it's very unlikely it'd happen but people always go oh my mates corolla has had them a year without breaking etc.. street driving is a hell of lot different to full on track driving.. very unlikely it'd happen yes but looks pretty gnarly Quote
Daizy70 Posted September 23, 2012 Report Posted September 23, 2012 Plenty of top drivers use Rotas like luke fink and stuff so they can't be that bad I suppose Quote
Jono.C Posted September 23, 2012 Report Posted September 23, 2012 I do think they are a lot better than they used to be Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.