Mitch-12 Posted June 18, 2011 Author Report Posted June 18, 2011 yeah I'm thinking that taz i would of went to deni if dad was home and my car went you are as fast as me now rob haha Quote
Ella Posted June 18, 2011 Report Posted June 18, 2011 I'm interested in the watts linkage, does it replace the panhard rod? DO you have to change anything else? Quote
Redwarf Posted June 18, 2011 Report Posted June 18, 2011 hey mitch, see u r making some real progress, will you have it ready for next race day? tomorrow me and pete probly going to deni to race on their track. Check it out on you tube it looks like full on race track but smooth dirt. I went 1.8sec quicker again at winton so down to a 1.45 now, not bad for 1.6lt corolla :) If Deni is still as good as it was 10 years ago, it's probably the best Autocross track in the country. The place sets like concrete, and after you''ve knocked the top off the dust, it's super grippy and you end up leaving black marks on the dirt. Back in the day the locals used to use Yoko 008R tarmac tyres. Used to get towelled each and every time by a Nissan March Supersport. Good times. :) Quote
Mitch-12 Posted June 18, 2011 Author Report Posted June 18, 2011 pull the panhard rod out and cut the bracket off the diff put 2 new brackets on the diff and you need a rocker in the centre on the bracket ill take some pics tommorow to show everyone when its up on the forklift Quote
Mitch-12 Posted June 19, 2011 Author Report Posted June 19, 2011 my exhaust used to hit the ground so heres the solution not finished yet Quote
Mitch-12 Posted June 19, 2011 Author Report Posted June 19, 2011 finish it thursday when i get some more gas for the mig Quote
Mitch-12 Posted June 19, 2011 Author Report Posted June 19, 2011 also got my pumps and surge tank sorted (mock up) how it is now and giving underneath a pressure wash Quote
Mitch-12 Posted June 20, 2011 Author Report Posted June 20, 2011 red one is a donor sortof its my ls6 powered sportssedan when i get this black car done and we have a hoist but i can pressure wash in the shed haha Quote
Redwarf Posted June 21, 2011 Report Posted June 21, 2011 Mitch12 won't be rejoining us for a little while. Quote
Mitch-12 Posted June 25, 2011 Author Report Posted June 25, 2011 I'm back and all good someone got on this computer and made an acc and shit went down lol anyway i have got a fair bit done this week ill let the pics do the talking had a bit of a practise with the tig :) My muffler box finished the exit hole out the sill repair from the old exit hole fully low mate i had it outside while i cleaned the shed my custom arms that i am changing the one on the right in the pic (lhs) is twisted and cracked I'm going to a rosejoint adjustable setup and heres the watts link I'm gonna rosejoint that too and my exhaust 2.5inch mandrel bent straight through cost for exhaust $0 i made it out of second hand ones laying around and found all mandrel bends :) and injectors fitted not sure either 550cc or 660cc Quote
Rob 5000 Posted June 25, 2011 Report Posted June 25, 2011 you have been busy, i'm worried though that you don't have enough V8 blocks lying round in that workshop :rolls: Quote
Mitch-12 Posted June 25, 2011 Author Report Posted June 25, 2011 theres two under the bench in one of the exhaust pics :) other than that theres no more haha i havn't been earning any money for the past month with dad in the U.S Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.