kickn5k Posted June 4, 2012 Report Posted June 4, 2012 New wheels for 5 stud conversion on my KE30, 16 inch Falcon chasers. Are you painting these yellow? Quote
radrollaz Posted June 4, 2012 Author Report Posted June 4, 2012 nah going to keep them silver. I got over the yellow. Quote
radrollaz Posted June 4, 2012 Author Report Posted June 4, 2012 definatley will do one more cruze before i start pulling it apart. Quote
radrollaz Posted June 4, 2012 Author Report Posted June 4, 2012 xt130 sturts with ms65 hubs? Going with Hopper stoppers bolt on brake kit, custom 5 stud hub 300mm rotors and falcon twin piston calipers. Quote
radrollaz Posted June 8, 2012 Author Report Posted June 8, 2012 (edited) Got an R31 silhouette diff for the rolla, LSD 28 spline Borg warner. It looks like shit atm, but its nice and tight nearly no backlash and looks to have been rebuilt at some stage. Had a look inside and it looks good, thinking of going 4.11 ratio as its 3.7 factory but not sure atm. Getting it cut down in the next few weeks and fitting falcon axles to convert to 5 stud. Edited June 10, 2012 by radrollaz Quote
radrollaz Posted June 10, 2012 Author Report Posted June 10, 2012 Ok, so i cut all the standard brackets off the diff today, leaving just panard rod mount which ill be using and sway bay mounts which ill also try and use. Took fricken ages but turned out well, sprayed a little primer on it to stop any surface rust till i drop it off next week to get cut down. Enjoy ! Quote
radrollaz Posted June 11, 2012 Author Report Posted June 11, 2012 Started stripping the motor down today. I disconected the engine loom from the motor, pulled the factory exhust manifold off and the AC pump also as i wont be using these, now its ready to start fab work mounting it in the engine bay of the rolla. Stay tuned ! Quote
lzabi1 Posted June 12, 2012 Report Posted June 12, 2012 How much is shortening gonna set you back? If you don't mind me asking. Quote
radrollaz Posted June 12, 2012 Author Report Posted June 12, 2012 Usually allow $1000-$1500 for a diff conversion. Quote
radrollaz Posted June 19, 2012 Author Report Posted June 19, 2012 (edited) Been playing around with a spare intake plenum i bought cheap, deleting all the factory casting marks off the plenum and runners smoothening it out for hi fill primer so i can paint it when I'm ready. Should look the goods when its done ! Edited June 19, 2012 by radrollaz Quote
radrollaz Posted July 10, 2012 Author Report Posted July 10, 2012 Hi guys, been really busy working on the rolla lately. I dumby fitted the motor in the car and got more of an idea as to what needs to be modded to fit the f20c. Here are a few pics of some of the recent progress. Enjoy Quote
kickn5k Posted July 10, 2012 Report Posted July 10, 2012 I reckon leave the standard dash! Don't these things require the OEM dash to even run? Quote
StasIII Posted July 10, 2012 Report Posted July 10, 2012 hahaha far out ur a bothered c*&t .... lol .... when can i come check it out ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.