Heath. Posted April 13, 2011 Report Posted April 13, 2011 hey guys. i should be gettin a pair of quad lights for my 1983-4 slanty front ke70 turned flat front. I'm just wonderin if the quads will need special brackets or anything to bolt in? any help is greatly appreciated!!! Quote
B.L.Z.BUB Posted April 13, 2011 Report Posted April 13, 2011 It'll all bolt in but you will need to cut your beaver panel a bit. And a bit of wiring. Quote
Spencer[RL] Posted April 13, 2011 Report Posted April 13, 2011 Strangely mine are very close to the beaver panel but not touching , so I didn't have to cut my beaver panel and you might need to drill some new mounting holes so it lines up all nicely. Quote
bAKER Posted April 13, 2011 Report Posted April 13, 2011 Strangely mine are very close to the beaver panel but not touching , so I didn't have to cut my beaver panel and you might need to drill some new mounting holes so it lines up all nicely. You don't need to cut the beaver panel if you get the DX beaver panel. If it's standard Aus ke70 then you will need to cut a piece out. You don't need to drill any holes if you get genuine quad headlight with brackets. A fair bit of wiring too. Quote
Heath. Posted April 19, 2011 Author Report Posted April 19, 2011 wellllzzzzz ok.. i have got them in now YAY BUT! now what i have to do is get them all to work. i will have to splice wires and shit to do that buttt end result will look soooo dope hhaha cheers for all the help guys Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.