Herbert The Panel Van

[Willis]

Some gnarly guard work you've done there. Dig it.

[iwontarolla]

couple of pictures of the guard on the car. almost done need bit more dolly work couple of little holes welded. then a skim of bog.

[JJT036]

That is very good work mate. Looks awesome. :y:

 

Josh :cool:

Edited March 28, 2012 by JJT036

[iwontarolla]

quick update on washer/overflow bottle for any ones who cares. school is allowing me to use the cnc plasma cutter to cut all the pieces out saves me a damn lot of time and problems. and program will be saved. just have to draw it up on cad now then cut it all out.

[SLO-030]

Make up another one for my water/meth injection?

[iwontarolla]

if you draw up some plans of what you want i can draw it up in nx then get it cut out and welded?

[iwontarolla]

cutting out my washer bottle on the cnc plasma cutter today. i made a cardboard mock up and test fitted it. i had to make it like the stock one but with out curves. i measured off the cardboard model so measurements might be out a bit. so hopefully every thing will line up nicely. loaded the pulsar up wiht stainless steel sheet. update when its cut, then over the holidays ill tack it up then weld it.

also started my other gaurd the other night in the dark got it all tacked up and ready to be cut then filled

[iwontarolla]

So spent a lesson cutting every thing out. There's one problem I have found so far but not that bad.

[philbey]

How you going to weld that goodness up?

 

I can help out if you need, I should have enough Stainless TIG rods for it.

[iwontarolla]

I'll weld it up over the holidays, just need a mother bottle of gas and I'll get on it.

[iwontarolla]

got in to the other guard today didn't have much time as i had to help my dad cut some holes in to our boat haha. got a lot more then i though i would get done though. also going in to jaycar tomorrow to have a look at the programmable ignition systems(any one done this or got info about them?). couple of photos.

then the hole in the boat. the inboard fuel tanks are all corroded so we couldnt use them. the haul was being filled wiht water from the live bait tank pump. so getting new stainless steel tanks made up to be put in.

[Willis]

You're really going all out with those guards hey? Nice work.

[SLO-030]

Lookin' good! I hope the guard hasn't warped at all during the cutting and welding off the car :hmm:

 

If you still have access to the gear, I'll send you a PM with some details for some CNC stuff.

[iwontarolla]

yea I'm hopping it hasn't as well i don think so cause the way i've mounted it there's no flex in it but ill move my car tomorrow if it will start. mount it up and check and probably do the rest on the car.

 

I'm not at school for the next two week as its school holidays but i can still draw stuff up on cad ready for when i go back.

[iwontarolla]

went to jaycar today got these two they didn't have the controller for it but i'll order that in.