bAKER Posted January 26, 2011 Report Posted January 26, 2011 shouldn't it just slide off or gently lift the bottom edge off with a screwdriver and then work it off, if you don't intend to use them again just rip it off Ha ha good joke. It's pretty much impossible to get them off at this stage... I remember a guy bent the top lip off, after days of soaking etc. He needed to order new ones to go back on, and clips. Quote
Spencer[RL] Posted January 26, 2011 Author Report Posted January 26, 2011 So tape it up I guess and spray around it! Quote
B.L.Z.BUB Posted January 26, 2011 Report Posted January 26, 2011 Just tape 'em yeah. They were probably flexible when new but after almost 30 years you'd just be risking ruining them. Depends how anal you wanna be about your paint I suppose. Quote
Spencer[RL] Posted January 26, 2011 Author Report Posted January 26, 2011 I hate when you put some bog over a little patch and you put about 10mm to much and you don't have the right sand paper below 240 grit. :glare: piss's me off Quote
Spencer[RL] Posted January 26, 2011 Author Report Posted January 26, 2011 Practised on the boot today , so much orange peel I need to cut back! Quote
Spencer[RL] Posted January 28, 2011 Author Report Posted January 28, 2011 Whoa , Def not painting today , perths humidty is of the charts! Was 33degress at 8 am in the morning!! Anyone keen to buy my wheels? cause you guys read my build page you get first dibs.. They are: Strato upsilon R14 x 7 +2 Offset... they are Fudddgiiing Rare Wrapped them in new Pirelli tyres 185/65 never ever driven on! Nice Stretch Looking for $1000 Cheers Quote
twisted2 Posted January 28, 2011 Report Posted January 28, 2011 what rims are you looking to changing 2 ?? Quote
Spencer[RL] Posted January 28, 2011 Author Report Posted January 28, 2011 Something a bit fatter .. Quote
K3L0V3 Posted January 29, 2011 Report Posted January 29, 2011 can u get them to liverpool sydney?? Quote
Spencer[RL] Posted January 29, 2011 Author Report Posted January 29, 2011 (edited) If you pay for postage, yea sure they can get there. Start here http://www.e-go.com.au/home.do;jsessionid=B03B7DE8D12EE5F3B3BF974D49D3B4C1 Just did a quick quote and from perth Forrestfield - Sydney Enfield (Depot- Depot) Cost you around $50 Edited January 29, 2011 by Spencer Quote
Spencer[RL] Posted February 1, 2011 Author Report Posted February 1, 2011 Was to windy today, but just cleaned up a couple of things so was alright! tomorrow seems like a go if its not to hot! Quote
SkidzMgee Posted February 1, 2011 Report Posted February 1, 2011 Looks not bad on the prep side of things, keen to see photos of the car in white once your done. Any particular shade of white you going with? Or just some bucket of paint you found lying around? :D Quote
Spencer[RL] Posted February 1, 2011 Author Report Posted February 1, 2011 Its 3m arcylic paint ( gloss white ) Should come out overrated ! got couple of suprises still to come but wont let them out the bag just yet! :wink: Quote
SkidzMgee Posted February 1, 2011 Report Posted February 1, 2011 ooooooooo sexy :yes: moar pics when done or ban. plus what rims are you looking at for getting fatter? i.e. 8/9J @0-10+ offset? *drools Quote
Spencer[RL] Posted February 7, 2011 Author Report Posted February 7, 2011 Grrr rolling guards failed today!!! cause I cut the lips off the gaurdss, the had way to much rust... so looks like rear flares ..... :fuzz: these guys are going to be on my ass everyday! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.