Ke55 Tail Lights.

[dave_89]

hey guys,

my ke55 tail lights are not working and from what i can see there is no reason why...

fuses good, bulbs good and all the connections look clean. that is all i know what to look out for. what else could it be? cheers for any suggestions lads.

dave :)

[jono1986]

Do you have power going to the back of the light?

Do you have continuity between the earth of the light and the body?

If the globes have been replaced are they double filament or single?

Do the rest of the parks work?

Do the brake lights work?

 

Ummmm.....

[dave_89]

Do you have power going to the back of the light?

Do you have continuity between the earth of the light and the body?

If the globes have been replaced are they double filament or single?

Do the rest of the parks work?

Do the brake lights work?

 

Ummmm.....

 

 

ok thanks heaps for that...

double filament globe are there i know, brake lights are fine, and what do you means by parks sorry?

i will check it all out asap and come back with some results i hope.

cheers

Edited November 22, 2010 by dave_89

[ninja-philbo]

if ur in brissy have rear looms if u need one

[jono1986]

Sorry i meant parkers

[dave_89]

yea front park lights don't work for whatever reason..

[jono1986]

Do the dash lights work?

[dave_89]

Do the dash lights work?

 

funny that. i was just about to ask, they are also cooked but i never really bothered really

[jono1986]

ok, so it's either the switch, the relay or the fuse.

[dave_89]

ok lovely. i know the fuse is good (checked it multiple times)

as for the relay, where is it located?

and would a known working stalk fix the switch problem?

 

thanks heaps

[jono1986]

You can just unplug it and try, the relay (if even fitted) is underneath that kick panel next to the accelerator pedal. If you have a multi meter check power going into the switch, according to the diagram it could be a white wire or a grey wire or a red/green....this is easier in person.

[dave_89]

thanks heaps for your help mate.