kurts1 Posted June 13, 2010 Report Posted June 13, 2010 Hey I'm new here, Anyways I have just purchased a ke70 with a 5 speed box in it and am planning on transferring the engine to a 16 valve 4age as my daily driver. well my question is: is it possible to swap the bell housing on the k50 so it able to bolt up to 4age? yes i know it is not the strongest but its really smooth and will do the job for the moment anyway. Any advice would be appreciated, Thanks Quote
Tally Posted June 13, 2010 Report Posted June 13, 2010 no because you can't take the bell housing off a K50 as its not bolted on but actually part of the gearbox... Quote
RedKE30 Posted June 13, 2010 Report Posted June 13, 2010 (edited) Hey I'm new here, Anyways I have just purchased a ke70 with a 5 speed box in it and am planning on transferring the engine to a 16 valve 4age as my daily driver. well my question is: is it possible to swap the bell housing on the k50 so it able to bolt up to 4age? yes i know it is not the strongest but its really smooth and will do the job for the moment anyway. Any advice would be appreciated, Thanks Not possible as far as I know. Beaten to it ^^ Edited June 13, 2010 by RedKE30 Quote
hilux05 Posted June 13, 2010 Report Posted June 13, 2010 according to this thread it is..maybe pm him and find out what the dealyo is. http://www.ae86drivingclub.com.au/forums/s...hp?17583-a-KE70 Quote
beerhead Posted June 13, 2010 Report Posted June 13, 2010 AE70 and AE85 gearboxes are the cable type clutch gearboxes that'll bolt up to an A engine. You'll have to split the gearbox in half, as the bellhousing is integrated into the front section of the case. Find a T50, definitely a better gearbox. Quote
white_sandshoe Posted June 14, 2010 Report Posted June 14, 2010 Yes, beerhead is (as usual) right... I've got one of the elusive AE70s with A series K50 boxes attached. Good luck trying to find one... Though i can't imagine it'd be very expensive if you were to find one. Go T50 or, better yet, 4A- W5* bellhousing and supra box it! Quote
seabiscuit Posted June 14, 2010 Report Posted June 14, 2010 A T-50 will cost you $300 bucks. A K-50 with an A-series bellhousing will cost you nothing but it will take you 3 years to find one and will, on command, break. Quote
kurts1 Posted June 14, 2010 Author Report Posted June 14, 2010 Looks like I'm in for a t50 then. Thanks for the help :P Quote
Taz_Rx Posted June 15, 2010 Report Posted June 15, 2010 Yes, beerhead is (as usual) right...I've got one of the elusive AE70s with A series K50 boxes attached. Good luck trying to find one... Though i can't imagine it'd be very expensive if you were to find one. Go T50 or, better yet, 4A- W5* bellhousing and supra box it! Did you know littleredspirit is chasing a A-K50 mate? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.