ke71-rolla Posted May 7, 2010 Report Posted May 7, 2010 (edited) Howdy guys, trying to install my panhard rod, replaced the bushes. The end which connects to the diff, I'm having troubles knocking back on all the way. I've lubed it up with some rp7, and can get is so far as the thread is level with the busher, but no further....is there a good trick??? Thanks! Edited May 7, 2010 by ke71-rolla Quote
ke70dave Posted May 7, 2010 Report Posted May 7, 2010 yeah its pretty tough. especially the first time with new bushes, i assume you got ugraded ones? the first time i did mine i had to use a g-clamp around the diff to pull the panhard rod on. Quote
ke71-rolla Posted May 7, 2010 Author Report Posted May 7, 2010 got it in the end, just had to have the guts to lie all the way under the car :jamie: Quote
parrot Posted May 7, 2010 Report Posted May 7, 2010 By the way, don't tighten the bolts right up until you get the car back on the ground. Quote
Des Posted May 7, 2010 Report Posted May 7, 2010 By the way, don't tighten the bolts right up until you get the car back on the ground. Yup, The bushes will twist when you lower it if you tighten them when its in the air. Quote
ke71-rolla Posted May 7, 2010 Author Report Posted May 7, 2010 I got it to finger tightness, then re tightened it once it was lowered; that sound about right? Quote
ke71-rolla Posted May 7, 2010 Author Report Posted May 7, 2010 hahah, goodo had a feeling it was best to do it like that Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.