SLW42 Posted December 19, 2010 Report Posted December 19, 2010 technically and theoretically you should be able to mix springs between coilovers, i.e take a 6kg spring from a tien coilover and put it into the HSD's, assuming dimensions are correct, just a diff spring rate, maybe thats just hopes and dreams but it's worth looking into Quote
MattyZ Posted December 20, 2010 Author Report Posted December 20, 2010 yeah ill def look into since I'm not workin atm with my injury gives me 24-7 to do research :D cheers for all the opinions etc helps a great deal. Quote
MattyZ Posted December 22, 2010 Author Report Posted December 22, 2010 Small update, recieved my Dash cluster today! yaay sleeka spares definatly recommend them for anything. Quote
Undertaker_is_the_best Posted January 11, 2011 Report Posted January 11, 2011 any progress pics mate Quote
MattyZ Posted January 11, 2011 Author Report Posted January 11, 2011 nah none lately, ive been out of action i cut my thumb and tendon so been out with that and not allowed to do much. hopin to get back into it a couple weeks and ill get more photos. small section of where the battery tray used to reside finish removing washer bottle bracket/relocate, and finish grinding the welds and engine bay is done. rust kill the front panel and spray it black/por 15, and chassis rails. then prime the rest and paint voodoo blue. Quote
Undertaker_is_the_best Posted January 11, 2011 Report Posted January 11, 2011 nah none lately, ive been out of action i cut my thumb and tendon so been out with that and not allowed to do much. hopin to get back into it a couple weeks and ill get more photos. small section of where the battery tray used to reside finish removing washer bottle bracket/relocate, and finish grinding the welds and engine bay is done. rust kill the front panel and spray it black/por 15, and chassis rails. then prime the rest and paint voodoo blue. yea tru well hope to hear you back into it in a few weeks mate should be awsome Quote
MattyZ Posted February 1, 2011 Author Report Posted February 1, 2011 small update, not really allowed to do full on work on the car still so ive started to pull apart and give the heater/aircon units a tear down, clean(paint if needed) and new foam seals as the others are screwed, needs to be done so why not when i can't go crazy with the body. will get some progress photos up over the next couple of days. Quote
MattyZ Posted February 2, 2011 Author Report Posted February 2, 2011 pics as promised of the starting point and the heater casing pefore a lick of satin black rattle can. Quote
MattyZ Posted April 1, 2011 Author Report Posted April 1, 2011 Not much been done major just chippin away, aircon/heater box all painted cleaned ready fro new foam seals, and re assembly. picked my hilux diff up, it wont need shortening, just needs to be swapped from leaf, to spring. started cleaning it up with the wire wheel. thumb is as good as gonna get still stuffed but I'm back at work now i can really get back into it. so slow steady expensive updates should be happening soon. Quote
Undertaker_is_the_best Posted April 17, 2011 Report Posted April 17, 2011 can't wait to hear an update on this thing Mattyz Quote
MattyZ Posted April 18, 2011 Author Report Posted April 18, 2011 cheers mate, I'm gettin back into it decided ill finish off the interior rust wise, and get soundproof in and wrap it in plastic get it away from the frickin mice the f@$kers their shit is more corossive than rust its self lol. ordering clear corner lights after easter, and a front lip nom nom, trying to hunt down some bolt on flares to suit if anyone knows of any give me a yell. next: coil spring mounts on hilux diff, powdercoated black. paint the toyota logo on the housing for shits and giggles. disc brake rear for hilux. LSD center hunt for a w58 gearbox hopefully it handles 200+ killer wasps. sway bars. new bushes anything suspension related. Quote
MattyZ Posted April 19, 2011 Author Report Posted April 19, 2011 started smoothing the left strut tower now its been welded, and spot welds been filled so minimal filler is needed only a skim coat and i mean skim coat. will try get some pictures up soon. Quote
MattyZ Posted April 29, 2011 Author Report Posted April 29, 2011 Ordering a clear Racing jacket for it next week most likely. just collecting all the jdm bolt ons lol. will be ordering a front lip, adjustable rear panhard rod, strut brace, and clear corner lamps from Sleeka Spares in the upcoming weeks too. then order a set of bolt on flares, most likely from america. if i can't find some on toymods. will try get some pictures of the engine bay and racing jacket I'm after. Quote
MattyZ Posted April 29, 2011 Author Report Posted April 29, 2011 (edited) Double post :bash: Edited April 29, 2011 by MattyZ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.