Ksev Rack & Pinion Measurements

[MattyZ]

hey ksev owners

 

i have a question i was hoping someone might be able to answer

 

i own a ke70 and a ta22 celica and for the celica I'm looking at converting to rack and pinion.

i need to get the measurements for the rack off a 82 - 84 ksev, i would use mine but it bit hard to get accurate measurements, i was hoping someone might have a rack and pinion set up off their car and would be able to measure these dimensions

 

Ok here are the measurements I need for the RHD rack. end to end of the housing. The aluminum inside edge to the outside of the housing. the aluminum inside edge to the edge before or as it starts to round up you can see where it does. Then from that rounded up area to the short end of the housing edge. In inches if possible but metric will work.

 

 

 

if anyone can help that would be awesome

 

cheers matt

 

 

oh and heres a pic of my ksev

[MattyZ]

bumpski anyone?

[parrot]

Have you had a look on Toymods? There is an extensive thread on this very subject, very detailed as only Toymods can.

 

 

http://www.toymods.org.au/forums/showthrea...ack+pinion+ta22

 

and related

 

http://www.toymods.org.au/forums/showthrea...ack+pinion+ta22