Need Some Measurements Please

[comtoy]

hi can some one measure the hardtop corolla door windows especially the angle at the front so i can compare the panelvan windows with them as i haven't got any hardtop door windows to do a comparisin to thanks for any help

[Bamboo]

hi can some one measure the hardtop corolla door windows especially the angle at the front so i can compare the panelvan windows with them as i haven't got any hardtop door windows to do a comparisin to thanks for any help

 

What specs do you need? I know its angle. do you need the window measurements or do i have to get the protractor out?

 

Ps I threw my protractor out after high school!!!

[comtoy]

What specs do you need? I know its angle. do you need the window measurements or do i have to get the protractor out?

 

Ps I threw my protractor out after high school!!!

just some basic measurements no need to be to scientific as i threw my protractor out after school 2 lol

[jono1986]

Hey don't know if this helps but from the back corner to the top back corner is 340mm and from that same corner following the window all the way down to the front is 1120.....i'll draw a pic

 

 

[comtoy]

Hey don't know if this helps but from the back corner to the top back corner is 340mm and from that same corner following the window all the way down to the front is 1120.....i'll draw a pic

 

 

 

yeah that might just be enough info that i need

[jono1986]

i can also get the length of the base of the window if you want

[comtoy]

i can also get the length of the base of the window if you want

yes please that would be great

[jono1986]

yes please that would be great

 

 

 

ummm....the bottom of the window is roughly 980 and also the top of the window where it angles down is about 580mm from the back corner....update VVVV

 

[jono1986]

ummmm....use this as a guide just for now, tomorrow i'll do it in the daylight and get more exact answers

[Taz_Rx]

I don't think you're going to be able to use panno windows in a hardtop! :thumbsup:

Remember a hardtop is pillar-less (no B pillars) were as the panno has a frame around the top of the window as per normal.

[KeelzaMate]

ummm....the bottom of the window is roughly 980 and also the top of the window where it angles down is about 580mm from the back corner....update VVVV

 

 

If calculations are correct:

 

The bottom angle should be:

 

= 40.36 degrees

 

And the top angle should be:

 

= 139.64 degrees

[wde_bdy]

...

Edited October 16, 2010 by wde_bdy

[cuzzo]

Hardtop share glass with the Aussie T18, wagon is not compatible due to lower roof line on coupe/hardtop/liftback. The angles on the wagon/panelvan are the same as the 4 door or 2 door sedan and the doors interchange other than the rear door quarter window shape being different, can swap over window frame if required though.

 

Callum

 

So does the 2 door sedan doors fit the wagons?

[wde_bdy]

...

Edited October 16, 2010 by wde_bdy