Taz_Rx Posted March 4, 2010 Report Posted March 4, 2010 Happy to spend a bit of money - Re-graph it or try and retro-fit a boost retard solenoid onto it. Don't want to spend money - Lock it up. :yes: Yeah the chinese turbs will most likely be .64 Any plans for a lump stick in it? Quote
hosedogg Posted March 4, 2010 Author Report Posted March 4, 2010 Think bezender said the dizzy was already locked up didn't he? Either way whichever way works better :yes: as planning to efi it :hmm: yeah def wanna put a nice cam in there. Would a good cam for the 4ktc be the same as a good one for a 5kte? Quote
Taz_Rx Posted March 5, 2010 Report Posted March 5, 2010 If you want to EFI it later down the track then thinking ahead I would just use a locked up electronic dizzy. Then when you're ready to fit the efi, its just a matter of hooking the elec dizzy up to the ECU as the ignition input, because this input will also need to be a constant pulse, ie locked. The reason I asked if you want to fit a cam is if you're talking a/r ratios already then you should factor the cam you plan on using into your decision. A .48 housing will nearly have the response of a S/C, and just like the S/C it'll start to run out of legs in the top end. For this reason you would want to combine this with a very mild or even stock cam. Now on the other end of the scale if you want to run a .64 you need to combine it with a cam that will work in much the same rpm range. When I was running a .64 T28 (S14) boost didn't come on until around 1000rpm later, but when it did it just kept pulling harder and harder the more you reved it..... which worked a lot better with my larger cam than what my T25G does. Put it this way, with the T25G I hardly ever see the shift light as I'm better off cracking another gear and using the mid range. With the T28 I would quite often see the shift light and sometimes also find the limiter set at 7500. Quote
hosedogg Posted March 5, 2010 Author Report Posted March 5, 2010 In that case I don't want a 0.48 rear lol. I like to have a bit of lag so I can actually drive around off boost. Will wait till the turbo on it dies before getting another one though. First plan is to rego it. Then intercool it and set up the fuel system. Cam. Dyno tune. Leave it like that for a while then efi. Then engine wise that'll be it till Nikki gets her full license then drop in a 5k :P Quote
LXY-642 Posted March 8, 2010 Report Posted March 8, 2010 bezender sent me a few interior pics, so thought i'd throw them up in here. oh yeah and it's Matt. i just set up a new account, was sick of my username on the old one pretty much from as soon as i made that account like 3 years ago i think it was lol. Quote
mrs_wpn36 Posted March 8, 2010 Report Posted March 8, 2010 hey, i'm Nikki. Matt's gf. just thought would be best to post in here saying hey, considering this car's mine and Matt's :D can't wait to pick it up and get it all fixed up and running good and proper :D Nikki Quote
Taz_Rx Posted March 9, 2010 Report Posted March 9, 2010 Hate to say it mate but I think you might be up for a struggle to fit 7ke gear with that turbo location. I'll take you some pics an measurement of my engine bay and we'll see. In the meantime see if benzeder can take another pic of the bay looking directly down on the engine. Quote
LXY-642 Posted March 10, 2010 Report Posted March 10, 2010 Thanks si. Just sent him a text to ask if he could get that pic and also a measurement from rocker cover straight across to get roughly where the turbo housing is Quote
Taz_Rx Posted March 10, 2010 Report Posted March 10, 2010 Cool. This pic might help in the meantime.... Quote
LXY-642 Posted March 10, 2010 Report Posted March 10, 2010 He said there is 90mm from where the inlet manifold bolts to the he's to the flange on the turbo. And it's 40mm forward of the head. He has taken pics for me and I will put those up on here after work whn I can get on my laptop. On my phone now Quote
hosedogg Posted March 10, 2010 Author Report Posted March 10, 2010 Here's the link to the pic he took with those measurements on it http://m235.photobucket.com/albumview/albu...easure.jpg.html Quote
LXY-642 Posted March 10, 2010 Report Posted March 10, 2010 Oops. Didn't realise I was on that account. From your pic si it's looking like it prob won't fit unless maybe i use a 90 straight off the tb? Quote
Taz_Rx Posted March 10, 2010 Report Posted March 10, 2010 Thought this might make things easier, however my pic probably isn't straight above enough. Quote
LXY-642 Posted March 10, 2010 Report Posted March 10, 2010 looks like it will be fairly close. now looking at it like that might just need a 45 degree joiner to the tb at most? Quote
Taz_Rx Posted March 10, 2010 Report Posted March 10, 2010 We sort of also need a pic of both from directly front on too. :no2: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.