B.L.Z.BUB Posted June 30, 2011 Report Posted June 30, 2011 mechanical engineering of parts made by processes other than turning, casting, forging, .General mechanical engineering of parts (made by ...This troubleshooting guide gives general mechanical diagnostic guidelines. Use the following general guidelines for diagnosing electrical problems I am a bell end. I like to take it up the batty, yes I do. It feel really nice and is me favorite. WTF? Piss off we don't want your spam here. And why would you spam an American car yard on an Aussie site? Retard. Quote
K&S Posted August 17, 2011 Report Posted August 17, 2011 Referring to first post can I use xt130 tubes with ra40 tierods? Quote
K&S Posted August 17, 2011 Report Posted August 17, 2011 I'm putting gh sigma arms into a ke70 just thought id add that Quote
turbz10 Posted October 5, 2011 Report Posted October 5, 2011 bc adjstable coilovers with camber tops bolt in besides steering arm. but strut tops fit so no need to change Quote
ShowUsYourTints Posted March 1, 2012 Report Posted March 1, 2012 Quick question guys. Didn't wanna start a new thread, so I thought I'd ask here. I'm about to pickup a KE70 83 model. I have a list of suspension parts I've compiled and I was just wanting to run it past some of you more experienced guys before I go ahead and pay for it all. Front: AE86 Koni Adjustable front shocks w/ KE70 top hats XT130 LCAs AE86 Power Steering Arms 50mm Lowered Springs. Rear: KE70 Koni Adjustable rear shocks 50mm Lowered Springs The above setup is basically so I can run some wide wheels. At the moment, its likely that I will be buying a set of Rota Shakotan 15x8 -0 offset, with a 195/45/15. Also open to 15x8 -11 or 15x9 -0. Does the above setup work, and if not, what would you change/add/remove Thanks in advance gents. Shazza Quote
01sik Posted March 4, 2012 Report Posted March 4, 2012 yes all will work but add a lock spacer and you will have epic lock and camber with those xt130 lcas Quote
Oh-KE Posted March 4, 2012 Report Posted March 4, 2012 No it won't all work because the ae86 shocks will not fit the ke70 struts. You will need ae86, xt130, t18 or similar struts to fit those. AE86 Power Steering Arms won't fit ke70 struts either i don't think.. Quote
towe001 Posted March 4, 2012 Report Posted March 4, 2012 AE86 Power Steering Arms won't fit ke70 struts either i don't think.. No they won't fit, Unless, Shazz also means the ae86 struts AE86 Koni Adjustable front shocks w/ KE70 top hats Then they will fit. Quote
ShowUsYourTints Posted March 5, 2012 Report Posted March 5, 2012 Hi Guys, Yeah, will be using AE86 struts, with the KE70 top hats. AE86 steering arms, and xt130 LCAs. Cheers for the info. I'm about to order some Rota Shakotans, and am unsure of whether to go 8" wide or 9" wide. Both wheels will be +0 offset. Does anyone have any pics of roughly what it will look like with the config I've mentioned above? Cheers fellas, Shazza Quote
towe001 Posted March 5, 2012 Report Posted March 5, 2012 Nope, but i'll bet a dash of rain that somewhere in the rides section there'll be at least three threads with photos of how it looks. Quote
ShowUsYourTints Posted March 5, 2012 Report Posted March 5, 2012 Had a look at that. Looks great. Would love to go 15x9 -11 with a 185/50/15 but I think its going to be too much effort. Might have a look into 15x8 -11 with a 195/45/15 stretched onto it, on all four corners. Cheers, Shazza Quote
Rolla_06 Posted March 6, 2012 Report Posted March 6, 2012 Just thought I'd add you can use ge or gh sigma control arms in ke70's Quote
prqash Posted March 11, 2012 Report Posted March 11, 2012 bro don't get pissed off....can any of these setting be used in a ke20..... Quote
K&S Posted May 18, 2012 Report Posted May 18, 2012 Just thought I'd add you can use ge or gh sigma control arms in ke70's will ra65 tie rods have enough length to wind the toe out? or will i have to find ra40? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.