cinky Posted March 8, 2010 Author Report Posted March 8, 2010 yeah 15 or 16 would be good hence the work wheels on ebay Quote
mungi mods Posted March 8, 2010 Report Posted March 8, 2010 (edited) 15 x 7.5 -8.5's 195/50/15 easy to get and cheap done those works wouldnt fit they are a +30-38 offset would foul on the front struts without 25 mm spacers Edited March 8, 2010 by mungi mods Quote
skd30 Posted March 8, 2010 Report Posted March 8, 2010 15 x 7.5 -8.5's 195/50/15 easy to get and cheap done bit more common than the 14's too. I tried to find some second hand rubber for 14's (175/75 or 185/65...anything) no on had any (in taree that is btw lol). So 15's second hand should easier...good for a burn at round 25-35 each fitted Quote
mungi mods Posted March 8, 2010 Report Posted March 8, 2010 bought brand new 195/50/15 for $66 each today Quote
skd30 Posted March 9, 2010 Report Posted March 9, 2010 bought brand new 195/50/15 for $66 each today there not retreads are they? thats round what they wanted for em here Quote
cinky Posted March 10, 2010 Author Report Posted March 10, 2010 15 x 7.5 -8.5's,, Mungi mods i don't suppose you have got anything around this size as i noticed that you seem to turn out custom wheels faster than government can blow budgets Quote
mungi mods Posted March 10, 2010 Report Posted March 10, 2010 15 x 7.5 -8.5's,, Mungi mods i don't suppose you have got anything around this size as i noticed that you seem to turn out custom wheels faster than government can blow budgets i have some coming soon.. Quote
cinky Posted March 10, 2010 Author Report Posted March 10, 2010 swweeeeettttt. any idea of what they may look like? Quote
cinky Posted March 15, 2010 Author Report Posted March 15, 2010 ok i have majorly f**ked up. i have tripped the points on the locking key for my wheels nuts? as it is a star piece. the key is male nuts are female and inset in the wheels any ideas on how to get the out. ive tried getting another key but know one seems to have one? Quote
seabiscuit Posted March 15, 2010 Report Posted March 15, 2010 ok i have majorly f**ked up. i have tripped the points on the locking key for my wheels nuts? as it is a star piece. the key is male nuts are female and inset in the wheels any ideas on how to get the out. ive tried getting another key but know one seems to have one? Take it to a wheel shop - they charge a small fee to get them taken off. Otherwise my advice is lots of thinking and trying! Quote
KENut Posted March 15, 2010 Report Posted March 15, 2010 Weld square tube to nut, use shifter to undo. Bewdy mate! But then your nuts are stuffed Quote
mungi mods Posted March 15, 2010 Report Posted March 15, 2010 (edited) swweeeeettttt. any idea of what they may look like? rays mesh 15 x 8.5 full set with pearl white centres similar to these enkei rp701 Impuls 5 spoke 15 x 8.5's not sure what colour centres yet new outer will have 4 inch flat dish ( on right ) Edited March 15, 2010 by mungi mods Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.