huwtraws Posted January 13, 2010 Report Posted January 13, 2010 Small End Pin Size - Big End Tunnel Size - Centre to Centre - does anyone know the sizes of these for the 4k engine? Quote
KENut Posted January 13, 2010 Report Posted January 13, 2010 Too bad you didnt ask yesterday, I could have measured them. They is in the engine now :P Big end - 42mm Quote
huwtraws Posted January 13, 2010 Author Report Posted January 13, 2010 Too bad you didnt ask yesterday, I could have measured them. They is in the engine now :P Big end - 42mm oh unlucky then. do you know if the 2k and 3k big end is 43mm then? Quote
flat out Posted January 13, 2010 Report Posted January 13, 2010 not positive but a machiner should be able to machine it out? why are you after 43mm any way? Quote
huwtraws Posted January 13, 2010 Author Report Posted January 13, 2010 not positive but a machiner should be able to machine it out? why are you after 43mm any way? A friend of mine has some steel ones, and has offered them for me to buy, but he's not sure if the 3k and 4k con rods are different Quote
KENut Posted January 14, 2010 Report Posted January 14, 2010 oh unlucky then. do you know if the 2k and 3k big end is 43mm then? Not sure, I imagine they would be the same as 4K. Why? Did your mate measure them as 43mm? Because 42mm is including bearing, or actual crankpin size if you like Quote
huwtraws Posted January 14, 2010 Author Report Posted January 14, 2010 Not sure, I imagine they would be the same as 4K. Why? Did your mate measure them as 43mm?Because 42mm is including bearing, or actual crankpin size if you like i see. id need to find out the lengh to check first though, 118mm he says Quote
tojo2 Posted January 14, 2010 Report Posted January 14, 2010 I'm guessing here but think hes got some CAT forged rods then. They state in their catalog the rods are for 3k-4k but measurements are wrong. My guess is they`re for 4e. http://www.catpep.com/searchengine/searche...amp;parttype=43 Seen them advertised on ebay as 3k-4k rods as well :wink: http://cgi.ebay.com/ebaymotors/TOYOTA1-2-1...sQ5fAccessories Quote
Taz_Rx Posted January 14, 2010 Report Posted January 14, 2010 You just reminded me that those Spool 5k rods should be about now Tor, might have to go ask the club-K guys who knew about them if they are yet. :wink: Quote
tojo2 Posted January 14, 2010 Report Posted January 14, 2010 :wink: Checked their home page earlier today. still listed as "soon to come". Quote
huwtraws Posted January 15, 2010 Author Report Posted January 15, 2010 I'm guessing here but think hes got some CAT forged rods then. They state in their catalog the rods are for 3k-4k but measurements are wrong. My guess is they`re for 4e. http://www.catpep.com/searchengine/searche...amp;parttype=43 Seen them advertised on ebay as 3k-4k rods as well :wink: http://cgi.ebay.com/ebaymotors/TOYOTA1-2-1...sQ5fAccessories ye they are them! so you would suggest stay away from them ye? is there any other companies that do steel con rods for 4k's Quote
tojo2 Posted January 15, 2010 Report Posted January 15, 2010 :wink: Checked their home page earlier today. still listed as "soon to come". Spool are planing to make for 5k wich are same as 4k. Guess around Aus $550 a set so cheaper than any other makes that I know of. If you are going to spend that kind of money why not start with a 5K? Quote
huwtraws Posted January 15, 2010 Author Report Posted January 15, 2010 Spool are planing to make for 5k wich are same as 4k. Guess around Aus $550 a set so cheaper than any other makes that I know of. If you are going to spend that kind of money why not start with a 5K? when are they out? ib be rallying in the 1400cc category so can't really Quote
tojo2 Posted January 15, 2010 Report Posted January 15, 2010 (edited) when are they out?ib be rallying in the 1400cc category so can't really Ok, that explains it. Ask them :wink: http://www.spoolimports.com/default.htm First hand info is always the best. Fairly sure your mates cat rods will suit a 4E Edited January 15, 2010 by tojo2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.