project_KE55 Posted October 27, 2009 Report Posted October 27, 2009 G'day guys. Just wondering if anyone knows if there is an easy strut conversion to do just so that the spring seat sits about 2-3 inches higher? Because i've brought a set of 17" Mags for my KE55 but the spring seat is only just sticking out too far and my wheel wont get enough clearance to bolt on. Any help would be greatly appreciated :yes: Cheers Mark. Quote
corollaart Posted October 27, 2009 Report Posted October 27, 2009 don't no of any easy strut converstions ,but you could convert to coil over . seach xt130 strut. Wheel spaces not my choice though :wink: Buy some wheels that fit :yes: Quote
jason12 Posted October 27, 2009 Report Posted October 27, 2009 If you really like the wheels the cheapest and easiest (and nastiest) way to fix it is to just use spacers. 20mm ons to suit an s13 should do the trick. Theyre not legal and a lot of people don't like them blah blah but me and many others have used them without any problems Quote
Taz_Rx Posted October 27, 2009 Report Posted October 27, 2009 Buy some wheels that fit :yes: :wink: Quote
altezzaclub Posted October 28, 2009 Report Posted October 28, 2009 Its not hard to get the spring base turned off in a lathe and welded on higher up, but it will raise the car those 2-3inches. Then you'll have to raise the rear to match, or run stiff short front springs which means changing shocks to match the springs and THEN changing the whole rear end to match... Either way you will radically alter the whole handling package! Quote
silverra23 Posted October 28, 2009 Report Posted October 28, 2009 Corona strut conversion (XT130) sounds like your best bet, but seriously 17's on a KE55 is going to look crap! Get some wheels in the right offset in 15's and she will be a good thing. Thats just my opinion of course :wink: Quote
shaded_shadows_KE55 Posted February 6, 2010 Report Posted February 6, 2010 i have 17in rims on mine sets it right off i just need to fill the gap in the wheel with bigger brakes Quote
towe001 Posted February 6, 2010 Report Posted February 6, 2010 (edited) don't no of any easy strut converstions ,but you could convert to coil over . seach xt130 strut. Wheel spaces not my choice though :D Buy some wheels that fit |blink| :hmm: Third that. But if its what you want - KE70 struts might be the better option cause the springs are narrower then the '55, t-18 etc etc. But the brakes are the same size to the '55 so the best option would be either upgrading to the xt130 or t-18/ae86 struts and then converting them to adjustable coil overs for the needed room. Cause really its just so damn poofy running big rims with tiny little brakes. Other then that backspacing - get the correct backspacing and they'll fit.... Edit - i can't number things.... :D Edited February 6, 2010 by towe001 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.