greendog Posted September 10, 2009 Report Posted September 10, 2009 hey all, i have a 3k ke35 my temp guage is sitting bit over cold when warmed up,should it be at halfway?seems to be chewing a bit more fuel than it should?i have a new thermostat to put in but the housing bolts seem like they will break if craked so I'm trying not to change if i don't need to.what does yours operate at?ta-nick Quote
LittleRedSpirit Posted September 14, 2009 Report Posted September 14, 2009 greendog said: hey all, i have a 3k ke35 my temp guage is sitting bit over cold when warmed up,should it be at halfway?seems to be chewing a bit more fuel than it should?i have a new thermostat to put in but the housing bolts seem like they will break if craked so I'm trying not to change if i don't need to.what does yours operate at?ta-nick Its pretty irrelevant to speak of half way, 1/4 way etc when referring to a 30 year old gauge. Install an aftermarket electric temp gauge and see what the temp is in degrees. If its 80-90 once fully warm it will be fine. Quote
Taz_Rx Posted September 14, 2009 Report Posted September 14, 2009 3rd'd And don't be a sook with the bolts. Just remember lefty loosey and you'll be right. Its not like removing bolts from the exhaust where they get to over 100*C every day and snap 99% of the time. Not even hard to source a new thermostat housing...... I have a couple you can have for a postage cost. :no2: Quote
greendog Posted September 15, 2009 Author Report Posted September 15, 2009 hopefully have a spare housing this arvo, cheers but taz rx.but i have seen a couple thermostat housing bolts break(not toyota but) and ive broken one before its just annoying when a 10 min job turns into a two hour one,especially when the car has nothing really major wrong in the first place.if it reads the same after i change thermostat il compare with an aftermarket from my other car,thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.