Chester The Ke55

[mungi mods]

yeh alright the story on the lowering repco says they can't get me blocks like wtf so I'm stuck with lowering for abit and they can only do low springs 20-30mm not super lows 40-50mm witch i want the story is with the springs they will only do low cause otherwise the springs drop out or some shit argh pretty peaved bout it :cool:

 

and tim my friend the carona lcas are the same as a ke55 so itll do shit all for me camber wise literaly =[ so i don't no how i am going to get me some camber =S but there isnt any point till i lower it argh hate my life hahaha once again :)

 

I'm pretty handy with a spray can hahaha :P

 

tim your friend little red spirit ask him if he will hook me up with a good price on one of the front lips for the early ke70s so i can put it on the ke55 ;)

 

you want camber

 

sigma lca's are for you approx 2 degees moreor later model bolted balljoint ones will give you 4-5 degrees ...bolt in to a ke 70 so...

[mitch_mac]

been awhile crocodiles

 

lately i have been abit hard up for moneys but i have added so far 300mm dildo shifter old man rear blind 2inch blocks rear cut the front lowred to 2inch aswell rolled the gaurds with abit of water pipe lol got black hotwires with crome lips on the back and the other wheels on the front with black centres they are at the tyre shop at the moment once they are on ill take some picks =] done whiteline front and rear sway bars to bitch of a mission!!! gonna try and fit my tx3 strut brace to it to if it fits noone makes them for a ke55

 

and thats about it

[mitch_mac]

 

 

 

ill get more once i get my wheels back tomorow and some of the sway bars to

[JJT036]

This Ke55 looks Mad Mitch !!! The Dildo Knob looks Really Good. Keep up the Good Work.

 

Cheers,

Josh :)

[mitch_mac]

thanks josh =]

 

alright let me ask what everyone thinks

 

gay or pimp is the answer I'm looking for

 

should i paint the bottom half of the car gloss black? from about the rubbers ont he doors down? and take the rubbers off?

 

i think it would look nice with my wheels i got on now ill take photos of them to

 

with the wide wheels on and those sway bars wholey crap batman sticks like shit to a blanket

 

thanks mitch

[Murd 55]

hey there interested in specs on ur wheels love the fitment want exactly that to suit my coupe, maybe a tiny bit more poke!

 

looks hott, not sure about the gloss black two tone, on this kind of shape generally need to split higher up like at the line just above the door handles and around the rear window.

[mitch_mac]

not sure of brand man but yes they fit really nice they are 14x7 0 offset i rolled the front gaurds and the rears alittle bit they scrub on the inside on the rear so il be taking a hammer to that soon to fix that they only just touch befor they hit bump stops the car is lowered 2inch all round to

 

i have since changed the fronts cuz they stick out the gaurds alittle to much i went a +5 offset to bring them in alittle and maily because i wanted to changed the wheels looks good now realy deep in the back and only a little bit in the front

 

yeh I'm not sure what ill do yet just putting it out there lol i could always do the bottom if i don't like it i can paint up higher to were you said

 

oh and i have one set of those wheels spare I'm looking to sell =]

 

thanks mitch

[13BT_KE20]

i think painting the bottom bit will make it look cheap and nasty, tacky!!!

 

don't do it, car look good how it is. Tuff stance to it

[mitch_mac]

hm i think i agree man i just photo shopped and yuck nah i agree

 

 

well not really photo shop lol good old paint haha

[JJT036]

True... It would make it look Ugly and Cheap, but Take the Rubbers off Anyway. :rock:

 

Cheers,

Josh :P

[mitch_mac]

took the rubbers off and it took most the paint with it argh! :P

 

so ill have to touch that up to look alright for the show and shine so while i was at it i badged it i was like eh ill do it all at once and fix it on the weekend so i do it all in one hit

 

oh how i love spray cans lol

[JJT036]

took the rubbers off and it took most the paint with it argh! :P

Is the Damage Serious?? It would've Sucked to see Paint come off with the Trims...

[mitch_mac]

its not to bad abit of spray putty wet and dry and a lick of paint and itll be sweet

 

but yes it wasnt nice seeing the paint come off =[

 

now my car has developed a exhaust leak i think

 

it sounds alittle bit like a harley when i drive and i only just got the exhaust put on argh

 

eather that or its the head gasket is just blown and its ticking on that but all the coolent is still there and it isnt over heating so i guees that rules that out

[mitch_mac]

alright been awhile so i got an exhaust leak in the rolla got the exhaust fitted 2 weeks ago and now they want to chrge me to fix it

 

so i told them how it was and I'm fixing it myself lol

 

got the sway bars in and the wheels on and god does it stick like shit to a blanket now =] need a strut brace to i can't seem to buy one for the ke55 anywere would a ke70 strut brace fit?

 

i got some twin carbys coming soon hopefully the old man can pay for them to be fitted and tuned for my birthday =] and a msd electronic ignition

 

and i just won a steering wheel on ebay so that should be on befor the show to and hopefully my oil presure gauge so it doesnt look incomplete so i got all 3 sitting in line looking good =]

 

 

 

sway bars read to go in =]

 

 

new front wheels

 

 

 

thats what I'm up to now i have abit of work cut out for me befor the show and shine touch up some paint get the steering wheel in and the other gauge and get the engine bay looking respectable maybe some red on the rocker cover

[TommyGun]

Looking awesome man. I know for sure your car will show up mine =P