4kc Build.

[The_Lab]

First things first,

 

I'm unsure if this is the right forum, so modes please feel free to move it where ever appropriate if I've stuffed up.

 

Ok basically I have come across a fairly clean KE70 shell and the plan is to throw in a 4k. Not just any old 4k I'll strip it down to a bare block and be building it myself.

 

My questions are.

 

Can anyone point me in the right direction to find forged pistons, and cam's. I'm sure I can still pick up a gasket kit etc.

Also I did a quick search looking for a 4kc build but there doesn't seem to be anything. So any advice you have will be great. (Please try provide a link or atleast a picture.)

 

Thanks guy's I know I'm asking for alot here but I hope you come through :D

Edited May 22, 2009 by The_Lab

[dopedx]

This MAY help..... http://www.rollaclub.com/faq/index.php?tit...a_tough_K_motor

[The_Lab]

This MAY help..... http://www.rollaclub.com/faq/index.php?tit...a_tough_K_motor

 

i spent more than 3 mins looking and also just found that.

 

just finished reading it :no2:

 

I'm a drifter but no Fujiwara Takumi :D

 

I want a tough little KE to roll around in and make bozo style noise :fuzz: Government says no forced induction ill roll around in an angry ass KE loud as a mutha f@$ker :cool:

 

The hunt is on for a 4k. :cool:

[philbey]

Forget forged pistons.

 

Cams are easy as; choose your grind, send it off, done.

 

4K's always come up on Ebay.

[The_Lab]

Forget forged pistons.

 

Cams are easy as; choose your grind, send it off, done.

 

4K's always come up on Ebay.

 

i read that standard ACL's will do the trick :D

Edited May 23, 2009 by The_Lab

[philbey]

Yeh, and you're not going to need forged pistons. A set of ACL's should cost about 140 in 20, 40 and 60 thou over.

[The_Lab]

Yeh, and you're not going to need forged pistons. A set of ACL's should cost about 140 in 20, 40 and 60 thou over.

 

cheering. Appears this motor build might be cheap :dance: