Ke55e Offset

[tbo92]

Hi All!

 

Just wondering what is the offset for a KE55e 4 Door Sedan?

 

Have googled but my google skills = fail :hmm:

 

rofl

 

 

Thanks heaps!!

Edited April 22, 2009 by tbo92

[tbo92]

Bump

Edited April 22, 2009 by tbo92

[styler]

.......

Edited April 23, 2009 by styler

[beerhead]

Plus 30 will have your rims rubbing on the struts. That's a FWD offset. My old +20's needed a 7mm spacer as there was only 1mm of space between the rim and the strut. 4 - 12 is ideal on a RWD corolla, +4 may need a light roll of the lip if you run wide rubber.

[tbo92]

4 x 114.3 +27

 

Rang my local Bob Jane.

 

 

Thanks all for your imput!

 

someone should compile a list of these :hmm:

[Hiro Protagonist]

Considering my 14x7 +8 MA61 wheels sat just about perfect in the KE55 guards, 16x7 + 12 was the closest on the list.

 

Stock offset I think is +20, but that's on super skinny 80's spec wheels

[Taz_Rx]

Considering my 14x7 +8 MA61 wheels sat just about perfect in the KE55 guards, 16x7 + 12 was the closest on the list.

 

Stock offset I think is +20, but that's on super skinny 80's spec wheels

 

exactly..... +20 with a 5.5 imch wheel.

[tbo92]

What would you recomend for a 7" wide?

 

Thanks guys! your knowledge amazes me

[benzo]

Go for the +4

[styler]

get whatever gives you the same backspace, a few mm more or less should be okay.

 

+25mm is max track increase.

watch scrub radius and steering.

[Falken_KE30]

i run 15x7.5 +4 on the front on a KE55, sticks past guard even with some slightly stretched 195/50's.

and my guards have been "home flared" lol

[raffs rolla]

i just put trx rims on mine and there 15x7 i put are 5mm spacer front and

back didnt need to roll my back graud and my back is dropped 2and are half inchs

i will put pics up on monday..

[tbo92]

Thanks all for your replies, but i think i am more confused now then i was when i started :y:

 

if i purchase

 

http://www.rotawheels.com/images/products/rb_3.jpg

 

Those wheels, in a 16 x 7 4 x 114.3 +25

 

will they go onto my KE55 4 door sedan with out needing modifications to the car? ;)

 

or will i need spacers / guards rolling etc

 

also what size tyres should i put on these, 195/45/r16 ? (as i wish to keep profile reasonable low, and white wall them.) (or will they need to be more like 205/45/r16??)

 

Thanks heaps! :D i know one of more of you wonderful people will be able to answer that question :P

 

:)

Edited April 24, 2009 by tbo92

[Falken_KE30]

16 x 7 4 x 114.3 +12 with 195/40/R16 tyres will fit with no guard mods, maybe a slight lip at worst.

 

16 x 7 4 x 114.3 +4 with same tyres as above will fill gaurds nicely, will require a bit of flare of guards though, not much.

[kangaroosa]

What would you recomend for a 7" wide?

 

Thanks guys! your knowledge amazes me

 

 

I used to run 15" x 7" 8P on the front of my KE30 with 195/50/R15

No srubbing issues and the tyres were inside the gaurds. These bumped the front track well over the +25mm limit, so they are gone now.

Edited April 25, 2009 by kangaroosa