Teddy Posted December 12, 2003 Report Posted December 12, 2003 Hey - Another question from me! :) How hard would it be to change motors from the 4-k to a 4Age motor (the 100 kw, 16 valve twin cam) Just wondering :D
Teddy Posted December 12, 2003 Author Report Posted December 12, 2003 wow - u for got 1 thing. How much all up EX-cluding labour to do it.
Teddy Posted December 12, 2003 Author Report Posted December 12, 2003 Ah okok - any estimates on what the engins go out for theese days - very standard condition 1's (well, all rollla engins are good anyway...)
demuire Posted December 12, 2003 Report Posted December 12, 2003 Grim has pretty much covered it. But a few points to add (that probably overlap with what Grim has said): Crossmember: use the AE71 crossmember, it's bolt in and then you can pretty much bolt the 4AGE in. Failing that it's not hard to cut and shut the original crossmember. EFI stuff: You'll need to make a new line (5/16) for fuel to engine, use the existing fuel line as a return. Vapour line stays the same. You might want to look into getting a surge tank, but is not essential. You'll need a high pressure pump, look into VL's or similar cars that had external pumps. If you run a surge you'll need a low pressure pump as well. Exhaust: you *could* use the existing setup, but depending on what you have now it might be a little too small. Most people recommend 2" mandrel or 2.25" press. The small port (100kW) 4AGE is originally a FWD motor, you'll need a RWD exhaust manifold. I have a set for sale, 4-2-1 extractors with a plug for the EGO (somthing a lot of other extractors I've seen don't have) Gearbox: You'll need a T50, you'd be looking for one out of an AE71 or AE86. Then you need clutch slave and master, you can use the ones out of the above cars. You can use the existing flywheel/clutch out of the 100kW. Engine: The engine is originally FWD, so everything is the wrong way around. You can go the big adventure and source a RWD water pump etc and convert it to a RWD engine, or you can just run lots of pipes. Up to you. Intake manifold you can't really run the RWD manifold (well you *could*, but I wouldn't) because it had TVIS and was a sligthly different design - probably not suitable for the small port. Get the original small port manifold cut and shut, if in doubt give Anthony Kellam a call, he can help you out. You can use your existing 4AGE starter motor as well. Wiring: Have fun. Shouldn't be too hard, just time consuming. Try to get a complete loom, makes life easier. Cost: Depends really. For a guide I got my engine for $800, this included new seals, timing belt and the intake manifold cut and shut. Steel fuel line is a few bucks a meter, no big deal. Rubber fuel line so far I've spent about $70 in hoses and clamps, and I'm not finished yet. Surge tank was $60 (second hand). T50 mine (out of a TA22 Celica) is stuffed, prices vary significantly. I got mine for $40, you get what you pay for... Umm... Clutch slave and master were $60 (new). Cutting and shutting my crossmember I did, so no cost there. Umm... Wiring I haven't even looked at yet, will try to do as much as I can myself. Hope that helps.
Medicine_Man Posted December 12, 2003 Report Posted December 12, 2003 i thought it was the alternator that had to have a bracket made not the starter motor nick..
Teddy Posted December 13, 2003 Author Report Posted December 13, 2003 wow - thanks every 1 for ure help - sounds like a future-ish plan for my rolla :) :D :D I got my new 1 today - basiaclly for starters it will be getting the road worhy, small rust fixed - spray etc - making it a good first car. Then when the cash comes in - the ... Extras will come in as well :ninja: :spam:
Teddy Posted December 13, 2003 Author Report Posted December 13, 2003 you rippa - i got some bad news tho - the chocolate slize isnt going to plan - we don't have the ingredents, and no 1 is willing to drive me down to get the stuff ... oh well - ill see if i can pick up something on the way up - chockie slice next time... :) ... :D - ill be there for 9:30 if u like - cheers, have a good evening! Oh as i told ure bro on msn b4 - we could be moving house (COULD) so within 2 weeks when my new rolla is back out my house , ill see what I'm keeping, getting from other car - then that rolla is up for sale.(the old 1) - As a hole car, its goin gto go out dirt cheap - i might even give it away for free - what eva happens, soon there will be a ke70 on the market (70 - 80% of parts). Any offers Cyas all
Teddy Posted December 13, 2003 Author Report Posted December 13, 2003 yeah thats cool - the tail lights are in good nick, but the brackets inside arnt in the best condition - bonet is in exelent condition. Back seet - no rips, good cont. - Cash - well, its ur call.
Teddy Posted December 13, 2003 Author Report Posted December 13, 2003 I like that idea. hmmm.. not sure if it will be 2 morrow tho - moght not b able to get parts up there. It would be much easier if i droped them off at ur house in aspley - sound ok? or would u like them up at burpengary ur call, but i don't think i could do the parts up at burp 4 2 morrow.
Teddy Posted December 13, 2003 Author Report Posted December 13, 2003 lol change of plans - dad doesnt wanta move now - its very uncertin, but ill re phrase it better - we Could be moving any time within the next 2 years - lol. sound a bit better? ! look 4ard 2 2 morrow! Cyas
Jono Posted March 16, 2006 Report Posted March 16, 2006 spiggot bearing for the input shaft of the t50. fWD's don't have them.
Clown Posted March 16, 2006 Report Posted March 16, 2006 is there any reason this thread was revived fromt he dead?
Recommended Posts