SLW42 Posted February 4, 2009 Report Posted February 4, 2009 as said above how do i re wire them both so i can get my car running again Quote
KE30_KE35_KE55 Posted February 4, 2009 Report Posted February 4, 2009 mr ae71 said: as said above how do i re wire them both so i can get my car running again Are you doing a conversion auto to manual? if so there is a loom that needs to be swapped. Quote
SLO-030 Posted February 4, 2009 Report Posted February 4, 2009 mine still has the auto loom in it. i just ran 2 wires with male spade connectors on one end and female bullet connectors for the reverse switch. And a short ( 1-1.5inches) length of wire with male spade connectors to bridge the starter switch. you'll figure out which is which pretty easily if you can't remember. Quote
SLW42 Posted February 5, 2009 Author Report Posted February 5, 2009 KE30_KE35_KE55 said: Are you doing a conversion auto to manual? if so there is a loom that needs to be swapped. yeah i have done the conversion just tryin to get things through my head about the wiring SLO-030 said: mine still has the auto loom in it. i just ran 2 wires with male spade connectors on one end and female bullet connectors for the reverse switch. And a short ( 1-1.5inches) length of wire with male spade connectors to bridge the starter switch. you'll figure out which is which pretty easily if you can't remember. cheers mate much appreciated Quote
KE30_KE35_KE55 Posted February 5, 2009 Report Posted February 5, 2009 mr ae71 said: yeah i have done the conversion just tryin to get things through my head about the wiring cheers mate much appreciated loom that needs to be unplugged and a link connector fitted as in picture this is on the drivers kick panel on a ke30 ke55 Quote
SLW42 Posted February 5, 2009 Author Report Posted February 5, 2009 Ah i see now i wondered why i had that plug in the mixture of stuff i got with the conversion bits Cheers KE30_KE35_KE55 much appreciated Quote
SLO-030 Posted February 7, 2009 Report Posted February 7, 2009 i just bridged my starter loom where ti plugged into the park switch (on the trans tunnel). also ran the reverse switch wires from there too. Quote
SLW42 Posted February 12, 2009 Author Report Posted February 12, 2009 i also have the wiring for the 4k will that plug straight into the original harness (wiring is all motor wiring like oil pressure and what not) Quote
SLW42 Posted February 25, 2009 Author Report Posted February 25, 2009 still having a drama figuring out which plug to rip out and swap on the board inside the kick panel has anybody got any pics of exactly which plug i need to get rid of on a ke70/ae71?? i have done all the reverse switch wiring Quote
KE30_KE35_KE55 Posted February 25, 2009 Report Posted February 25, 2009 mr ae71 said: still having a drama figuring out which plug to rip out and swap on the board inside the kick panel has anybody got any pics of exactly which plug i need to get rid of on a ke70/ae71?? i have done all the reverse switch wiring Trace the wires back from the neutral park safety switch, unplug that loom and plug in a manual link or simply join up the wires mentioned above. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.