KE70PWR Posted February 1, 2009 Report Posted February 1, 2009 does the T50 use the same clutch as the standard K50 gear box i know i need the k-t bellhousing but need to know if i might need anything else Quote
Falken_KE30 Posted February 2, 2009 Report Posted February 2, 2009 Didnt know that... didnt need to but lol Quote
SLW42 Posted February 2, 2009 Report Posted February 2, 2009 t boxes wont fit k motors and vice versa Quote
seabiscuit Posted February 2, 2009 Report Posted February 2, 2009 (edited) t boxes wont fit k motors and vice versa Unless you have a K-T bellhousing... and vice versa :cool: I know there is a K-T bellhousing, never heard of a T-K bellhousing (if you'd be silly enough to use one) Edited February 2, 2009 by seabiscuit Quote
Taz_Rx Posted February 2, 2009 Report Posted February 2, 2009 So how do you put a T motor bellhousing on a gearbox that has an intergrated bellhousing (K40/50)??? :2thumbs: :cool: Quote
Falken_KE30 Posted February 2, 2009 Report Posted February 2, 2009 Zip ties and 100mph tape FTW Quote
D1doony Posted February 2, 2009 Report Posted February 2, 2009 do it once, do it properly. if your so lazy throw $100 in someones face and I'm sure someone could do it. Quote
SLW42 Posted February 2, 2009 Report Posted February 2, 2009 Zip ties and 100mph tape FTW just drill some more holes and she'll be right i second the zippie ties and 100mph tape Quote
KE70--4KCZ Posted February 5, 2009 Report Posted February 5, 2009 so what is needed to do the conversion? Quote
flat out Posted February 5, 2009 Report Posted February 5, 2009 well my understanding is, belhousing, clutch setup(hydro) but i think there were some k-t that where cable but don't quote me modified clutch modified crossmember tailshaft should be fine, might need to be shortened? thats all i think i know, probably way off Quote
KE70--4KCZ Posted February 5, 2009 Report Posted February 5, 2009 can anyone tell me what cluch to use? Quote
SLW42 Posted February 5, 2009 Report Posted February 5, 2009 you will most probs need a t series clutch, i don't know if the t clutch fits the k series flywheel, but u will need a t series tailshaft they are different to the k series output shaft has more splines Quote
Taz_Rx Posted February 5, 2009 Report Posted February 5, 2009 K-T clutches only fit K-T applications. Dimentions are 180mmx24.1mmx21T Actually why am I writing this again.......... :P Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.