springersrolla Posted February 1, 2009 Report Posted February 1, 2009 i gotta get my muffler sorted out its got holes etc.. i have a turbo tuff muffler in the shed 2". the car runs standard 1.5" pipe should i just get it welded on the rear and how loud will it be?? what sound have people got out of what setups? Quote
toyota_ae71 Posted February 1, 2009 Report Posted February 1, 2009 honestly the only way to find out how loud it is, is to try it yourself. probably not the best thing welding it on to a half inch smaller diameter pipe... unless you get an adapter that goes rom 1.5" to 2". Or if you have the spare $$$ put a new 2" system on it with some headers/extractors. Definetely made my 4k breath better. Cheers Quote
springersrolla Posted February 1, 2009 Author Report Posted February 1, 2009 the mufflers all been modifyed, the benefits of knowing 2 different exhaust fitters. problem is paying the money to get a sound like a wet fart in a can its a 1200cc corolla, i don't wanna be heard 3k's away going up a hill or stretching out a gear, its quiet now but it's leaking to much out the muffler just wondering if u run a resonator cause they change the sound a bit, i might get a reverse muffler see how it sounds. How does the 4k sound with your setup? does it drone on the highway or sound real buzzy? i just want a tight note thats why I'm thinking of leaving standard 1.5" Quote
Rolliac Posted February 2, 2009 Report Posted February 2, 2009 (edited) I have standard ke11 3k and exhaust. I cut the exhaust off just after the diff so no muffler and it was perfect IMO. Cruse along at 5000rpm and back it of to hear a nice growl. It was border line too loud like driving past cops or starting it up at 5am but was never pulled up for it. I had to get a road worthy so I put a 2” straight through offset muffler on and it was too quiet. I replaced the little resonator with a straight pipe and it is pretty good but I liked it heaps better without a muffler. Edited February 2, 2009 by Rolliac Quote
toyota_ae71 Posted February 2, 2009 Report Posted February 2, 2009 My 4k is a rally car so its kinda loud... abit too loud for road use for my liking but sounds pretty tuff. I've got Pace maker 4-1 extractors to a high flow "AEM" muffler then to a decent size hot dog. All the piping is 2" and exits under the passenger door. Cheers Quote
ke30Rolla myles Posted February 2, 2009 Report Posted February 2, 2009 hm car is heaps loud and sounds so cool i have got extracters threw to a 2 inch exhaust threw to a hot dog then my rotary dumpy pipe sounds like a v8 when ideling Quote
philbey Posted February 2, 2009 Report Posted February 2, 2009 that is a nice dumper. My old 4AC AE86 needed a muffler for roadworthy, I asked the guy to get something with a little bit more of a not to it and it was a nice clean, low understated engine note that wasn't the least bit intrusive. Stock system apart from that. Quote
coln72 Posted February 2, 2009 Report Posted February 2, 2009 For a roadie run a resonator and a muffler - 2" is a good size. On my KE35 ran with a resonator and a 2" in twin 1.5" outlets (think XU1 Torana). Looked and sounded good after I bashed out some of the baffles :2thumbs: On my KE20 club car tried heaps of different exhausts. The best one was a straight through 2" system that went under the diff into a small muffler and a 3" droopy out the back. Lots of comments re. "has it got a rotaty in it. The biggest bend was where it bent around the firewall. Latter on I went to a more conventional over the diff system to gain ground clearance. Wasnt as good though :cool: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.