altezzaclub Posted January 28, 2009 Report Posted January 28, 2009 OK, all you home mechs can no doubt do this easily, but for those who are starting with their first KE70 they will need this! When I was looking for one to buy all the manuals were well-thrashed by young hoons, and all the excellent ones were autos driven by little old ladies... I've posted it all up at our sister-club here http://www.ke70.com/forum/index.php?showto...entry9550 Quote
Tally Posted January 29, 2009 Report Posted January 29, 2009 (edited) what a ledgend as I'm just about to attempt to do this!!! just a question are the engine plates same auto to manual? one has a viewing hole but that shouldnt make a difference should it? Edited January 29, 2009 by Tally Quote
camcam Posted January 29, 2009 Report Posted January 29, 2009 OK, all you home mechs can no doubt do this easily, but for those who are starting with their first KE70 they will need this! When I was looking for one to buy all the manuals were well-thrashed by young hoons, and all the excellent ones were autos driven by little old ladies... I've posted it all up at our sister-club here http://www.ke70.com/forum/index.php?showto...entry9550 sick man good idea so many people would need help with this kick ass :jamie: Quote
Taz_Rx Posted January 29, 2009 Report Posted January 29, 2009 what a ledgend as I'm just about to attempt to do this!!! just a question are the engine plates same auto to manual? one has a viewing hole but that shouldnt make a difference should it? Pretty sure the Auto "viewing hole" in the backing plate you speak of is to get access to the flex-plate>torque converter bolts. :jamie: Quote
ke20rolla Posted January 29, 2009 Report Posted January 29, 2009 Yeah your on the money Si. :jamie: You can get a plastic plug that fits in the hole still available from Toyota. :hmm: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.