Wiring Loom

[greenmac80]

hey i have a connector chopped off and i'm wondering if anyone can recognise

what it is meant to be for?

heres a photo of the connector cluster!

cheers, Luc

[the Db king]

from what i can see that is your alt wiring and another plug maby,

[greenmac80]

yeah the grey ones are alternator.

the black one i'm not sure of but it goes to the other side of the motor.

so i don't know what the frayed ones are meants to be

[Medicine_Man]

Lay the loom out a bit more so we can get an idea of where the other wires are meant to go..

[greenmac80]

will do tomorrow.

 

the connection i'm showing come out of a single strand. so they are meant to be near each other

[Trev]

As it has been stated, It is the alternator wiring.

[Medicine_Man]

No, The 3 pin oval plug and grey rubber boot are the alternator wires..

 

There are still more wires..

[greenmac80]

the black connector was for air con i reckon as it goes to the other side of the motor.

but the loose ones have got me stuffed

[Trev]

No, The 3 pin oval plug and grey rubber boot are the alternator wires..

 

There are still more wires..

 

Yeah it's alot different to the 16v loom.

[greenmac80]

another photo

[Sam_Q]

you might have to use a multimeter and find out to which pin on the ecu it goes if it does at all, no thick wire will.

[Kebin[RL]]

I believe the chopped plug could be the o2 sensor due to the thicker grey wire in the bunch. Does the grey wire have a shield around the cables?

Then you have alternator plug, a/c pressure switch and possibly a speed sensor plug.

[greenmac80]

yeah i believe its the o2 sensor.

but now i don know where to get a connector!