Taz_Rx Posted June 30, 2009 Report Posted June 30, 2009 hey leigh, dunno if I've said this already but it might be worth you chucking a PM to madrolla68 and ask him if he wants to buy the HDCB. He needs a K-T clutch and I don't know if he's got one yet. BTW, what did you pay for the HDCB? Quote
leigh Posted June 30, 2009 Author Report Posted June 30, 2009 Hey Si.... The K- T button clutch i had came with the motor on the 5k... it fits a 5k flywheel! then new excedy on I just bought fits to the 4k flywheel! :P umm it cost me $240 i believe! :) Quote
Taz_Rx Posted July 1, 2009 Report Posted July 1, 2009 Hey Si.... The K- T button clutch i had came with the motor on the 5k... it fits a 5k flywheel! then new excedy on I just bought fits to the 4k flywheel! ;) umm it cost me $240 i believe! :y: Oh ok, I just assumed you bought the button new. Thats why I was saying try and get used to it so you didn't waste your money. My HDCB was like $400 at near cost price!!!! In that case I don't know if Madrolla68 would want it as I thought it was new. :wink: Quote
leigh Posted July 1, 2009 Author Report Posted July 1, 2009 Oh ok, I just assumed you bought the button new. Thats why I was saying try and get used to it so you didn't waste your money.My HDCB was like $400 at near cost price!!!! In that case I don't know if Madrolla68 would want it as I thought it was new. :wink: $400 dam thats heaps............ yeah don't think he would want a second hand clutch hahaha Very happy with the new HD clutch tho... so much nicer to drive with. Loving the 5spd, 110 on the highway she sits on about 2100rpm :y: Quote
ke20rolla Posted July 1, 2009 Report Posted July 1, 2009 Don't you mean 3,100rpm :wink: if it sits at 2,100 then you have very low ratio's. :y: Quote
leigh Posted July 1, 2009 Author Report Posted July 1, 2009 well thats what my tacho says.......... unless thats wrong??? Quote
Taz_Rx Posted July 2, 2009 Report Posted July 2, 2009 Agree with Mark, 2100 sounds WAY too low. 100-110 in mines is around 3000-3500rpm Sure your speedo is correct? mines out. Think my T50 speedo sender is for a 4.11 diff and I have a 3.9. 100kmh is about 83kmh on my speedo. Last time I was at the drags I was crossing the line at 120kmh on the speedo and my time slips said 145kmh!!!! Quote
leigh Posted July 2, 2009 Author Report Posted July 2, 2009 Agree with Mark, 2100 sounds WAY too low. 100-110 in mines is around 3000-3500rpm Sure your speedo is correct? mines out. Think my T50 speedo sender is for a 4.11 diff and I have a 3.9. 100kmh is about 83kmh on my speedo. Last time I was at the drags I was crossing the line at 120kmh on the speedo and my time slips said 145kmh!!!! Haha maybe my tacho is up the shit lol! Its an old one i found in the garage! Trying to find a 2" tacho with shift light but i can't seem to find one! :y: would be pretty cool tho if it did sit on those revs at that speed! :wink: Quote
leigh Posted July 6, 2009 Author Report Posted July 6, 2009 found a switch on the back of my tacho! All good now! lol i think it reads correctly Quote
Taz_Rx Posted July 7, 2009 Report Posted July 7, 2009 You had its switched to 6 or 8 cylinders didn't you!!!? :wink: Quote
leigh Posted July 7, 2009 Author Report Posted July 7, 2009 You had its switched to 6 or 8 cylinders didn't you!!!? :wink: Maybe....... Thought it may of tricked the 5k into think she was a 6 cylinder! :wink: Quote
leigh Posted July 20, 2009 Author Report Posted July 20, 2009 (edited) Car is going along well! Been trying to get the k's up on her! :P Booked in for dyno tune on wednesday so fingers crossed she will be running sweet! Have also installed a full alarm and central locking system aswell......... since I'm not sure if someone tried to break into her! :) can't use the key on the drivers side door anymore! Once dyno tune is done I'm thinking i'll lower it another 1" all round so the tops of the tires are level with the guards and then some 14"s at some stage! Edited July 20, 2009 by leigh Quote
Taz_Rx Posted July 23, 2009 Report Posted July 23, 2009 Dyno figures!????? Or is it still there, not touched yet in true Brad style!? :P Quote
leigh Posted July 23, 2009 Author Report Posted July 23, 2009 Dyno figures!????? Or is it still there, not touched yet in true Brad style!? :lolcry: Here you go!!!! I was pretty happy with this output...... Goes so well when the cam kicks in! This is who I park all my cars with each day! :y: Quote
bruce Posted July 23, 2009 Report Posted July 23, 2009 Good result. What's the details of the cam profile you are using? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.