ke rollin 20 Posted February 5, 2008 Report Posted February 5, 2008 hey all, iv currently got anouther ke11 for a little project, its just in for a respray and a new engine an some other minor things, basically i don't have any idea on what engines will fit in to the ke11 model other than the 5k, 7k, and I'm after something with abit more power but i don't want it to set me back millllions and i don't want to chop up my firewall an that, i really want a turbo engine an don't want to rotor it, so iv hada sus around on here and and I'm looking at the ca18 but just want to no if people have done it and how much the engine set them back and anything else that was needed eg. engine mounts an gear box. any pics or info and prices would be sweet as. cheers haydo Quote
leigh Posted February 5, 2008 Report Posted February 5, 2008 (edited) turbo a 5k ;) Or get out a tape measure Edited February 5, 2008 by leigh Quote
ca18rolla Posted February 8, 2008 Report Posted February 8, 2008 dude we have done one that cost about 2k start to finsh or mine owes around 35k it depends on what u expect from it and what corners you cut. 1. Mounts will cost nothing apart from the rubber engine mounts 2 factor in the following.. dump pipe and exhaust, engine mangement, bigger fuel lines, fuel pump/s, diff, brakes, FMIC and piping, Bigger radiator, wiring,hydrolic clutch conversion, custom tailshaft, Quote
YKE 20T Posted February 8, 2008 Report Posted February 8, 2008 fully agree with ca18rolla. i've blown 10k and am only half way there lol. Quote
oh what a nissan feeling! Posted February 8, 2008 Report Posted February 8, 2008 Hey ca18rolla, havnt seen you around for awhile, you should update your thread, tell us the news, have you still got it? :( mine cost under 10k on the road as a sr20det, but that was 98% diy, :) Quote
flat out Posted February 9, 2008 Report Posted February 9, 2008 sounds like thew ca18 is the go for me! Quote
ca18rolla Posted February 9, 2008 Report Posted February 9, 2008 Yeah I m still around, still got the rolla. All thats changed is rebuilt the turbo as it was a few years old. Put a new box in as the pintara one snapped the selector fork at the drags (tryed to slam it into gear lol) new custom 5 puck and modified pressure plate. Just need to wire up a new starter relay and she is right to go havent really driven it since last july. Proabably done around 100km since then. Will be running in the next week or two and getting another tune with 15psi. Quote
flat out Posted February 10, 2008 Report Posted February 10, 2008 how far back is the pintara shifter? will it sit near my handbrake? Quote
ca18rolla Posted February 10, 2008 Report Posted February 10, 2008 Pintara or ca20 boxes are the same as ca18 just the internals arent as strong. BUt yes it will sit further back depending on where you mount the motar in the engine bay. mine is about 3-4 inches further back then a normal ke35 it is fine though i like where it ended up and i shortend the standard hand brake lever as well. Quote
Jordan Posted February 11, 2008 Report Posted February 11, 2008 $2000 for a complete swap, dam that's uber cheap. I bearly got away for under $3000 upgrading the turbo on mine. Cheers Jordna Quote
ca18rolla Posted February 12, 2008 Report Posted February 12, 2008 $2000 for a complete swap, dam that's uber cheap. I bearly got away for under $3000 upgrading the turbo on mine. Cheers Jordna thats cause we did ever thing ourselves mounting, wiring, cooler piping, exhaust and dump pipe. brake conversion etc. The motor only cost $500 complete with everything. Fuk what turbo you get? I brought a gt2876r and thats a pretty massive turbo and it was only $1800 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.