dfunkt Posted January 12, 2008 Report Posted January 12, 2008 i've just picked myself up 2 gearboxes kinda cheap. one is a t50 from a TA22 (i believe) and the other is from a corolla (apparantly) here's the photo's of them that should help ID them The bottom one here is the t50 The left one here is the T50 i am very unconvinced that the unknown one is from a corolla, as the centre shaft is quite larger than the one on my k40 and the t50, as well as the clutch fork being on the opposite side of the bellhousing. all help is appreciated. dF Quote
Medicine_Man Posted January 12, 2008 Report Posted January 12, 2008 The one on the left is definatly a T50, Can't say I've seen the other box before.. Quote
bruce Posted January 12, 2008 Report Posted January 12, 2008 (edited) The top one could be a W50, from an RA40 Edited January 12, 2008 by bruce Quote
7shades Posted January 12, 2008 Report Posted January 12, 2008 I was going to suggest Corona W40... Quote
dfunkt Posted January 12, 2008 Author Report Posted January 12, 2008 (edited) well, i've found it has 4 forward and 1 reverse, and it weights a heap more than the t50... the numbers cast and etched into it are still readable, it had 33111-20090 cast onto the center section, and 33141-31010 on the shifter extension. Edited January 12, 2008 by dfunkt Quote
7shades Posted January 12, 2008 Report Posted January 12, 2008 You sir, most definitely have a W40. And by the looks of the bellhousing I would wager a testicle its from a Corona or Hilux with an R series engine. Quote
Guest Sbox Posted January 12, 2008 Report Posted January 12, 2008 (edited) Deleted Edited May 24, 2008 by Sbox Quote
dfunkt Posted January 12, 2008 Author Report Posted January 12, 2008 hmm, the only thread like that i remember is the taz-rx one with the k, k-t and k-w boxes... i'll have to hunt a lil more then sbox. cheers dF Quote
tojo2 Posted January 12, 2008 Report Posted January 12, 2008 The t50 (if its 5speed) is a small bearing-20spline out,- forward shifter pos.- hydraulic clutch set upp, most likely like you wrote, from a ta22. The w40 steel box can be moded to suit a k engine by using a K-liteace bellhousing++ Quote
Taz_Rx Posted January 13, 2008 Report Posted January 13, 2008 Yep deffinately a W40. Dunno what the BH is, can tel you as much as its not R-W though! Don't forget it not uncommon to find a W40/50 behind 202's, 253's, 308's, and ever rotors, so don't automatically assume its a stock toyota BH! :fuzz: Quote
pozman Posted January 13, 2008 Report Posted January 13, 2008 that could also be a Y or a deisel L series, Quote
AJC Posted January 15, 2008 Report Posted January 15, 2008 You sir, most definitely have a W40. And by the looks of the bellhousing I would wager a testicle its from a Corona or Hilux with an R series engine. What can you say.... The man is confident.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.